42
VQT2Q55
Optional speaker settings
Speaker installation
option
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 k
g
per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
≥
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
1
Drive a screw (not included) into the wall.
2
Fit the speaker securely onto the screw(s)
with the hole(s).
[BT737]
: Front speaker, Surround speaker
[BT337]
: Front speaker
Attach to a wall without the base and the stand.
[BT337]
:
Surround speaker
[BT230]
:
Front speaker, Surround speaker
F
97 mm
G
210 mm to 212 mm
H
72 mm
I
349 mm to 351 mm
J
26 mm
[BT737]
: Centre speaker
[BT337]
[BT230]
: Centre speaker
K
117 mm
L
209 mm to 211 mm
M
97 mm
N
18.8 mm
O
17 mm
P
99 mm to 101 mm
∫
To avoid speaker dropping
[BT737]
: Front speaker, Centre speaker, Surround speaker
[BT337]
: Front speaker
e.g.,
[BT737]
: Front speaker
≥
Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥
Use a string of less than
‰
2.0 mm, which is capable of
supporting over 10 k
g
.
[BT337]
Attaching to a wall
e.g.,
[BT737]
Front speaker
DO NOT
DO
≥
In this position, the speaker
will likely fall if moved to the
left or right.
≥
Move the speaker so
that the screw is in this
position.
A
At least 30 mm
B
‰
4.0 mm
C
‰
7.0 mm to
‰
9.4 mm
D
Wall or pillar
E
5.5 mm to 7.5 mm
[BT737]
[BT337]
Reattaching the speaker cable
A
String (not included)
B
Screw eye (not included)
C
Less than 10 cm
D
Rear of the speaker
Insert the cable
from the bottom.
Leave about
120 mm
Pull out the cable
through the hole.
SCBT737_337_230GN_VQT2Q55.book 42 ページ ２０１０年２月２３日 火曜日 午後５時２２分
