Radio
Playback
29
VQT2Q55
Radio
Listening to the Radio
Up to 30 stations can be set.
1
Press [RADIO] to select “FM”.
2
Press [STATUS] to select the position to
start the auto preset search.
LOWEST:
To begin auto preset with the lowest frequency (FM87.50).
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations
manually”.
3
Press and hold [OK].
Release the button when “AUTO” is displayed.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
≥
“SET OK” is displayed when the stations are set, and the radio tunes to the
last preset station.
≥
“ERROR” is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
Preparation
Select a radio broadcast.
1
Press [RADIO] to select “FM”.
2
Press [SEARCH
6
] or [SEARCH
5
] to select the
frequency.
≥
To start automatic tuning, press and hold [SEARCH
6
], [SEARCH
5
]
until the frequency starts scrolling. Tuning stops when a station is found.
1
While listening to the radio broadcast
Press [OK].
2
While “P” is flashing on the display
Press the numbered buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1]
B
[OK].
To select a 2-digit number
e.g., 12: [1]
B
[2]
≥
A station previously stored is overwritten when another station is stored in
the same channel preset.
1
Press [RADIO] to select “FM”.
2
Press the numbered buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1]
B
[OK].
To select a 2-digit number
e.g., 12: [1]
B
[2].
Alternatively, press [
W
,
X
] or [
2
,
1
].
∫
Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo
broadcasting
TUNED:
Displayed when receiving monaural
broadcasting or monaural sound is
selected.
Presetting stations
automatically
Presetting stations manually
Listening/confirming the preset
channels
∫
If noise is excessive
Press [AUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again to cancel the mode. “AUTO ST” will
be displayed on the main unit. Depending on the broadcast
system, stereo or monaural will be selected.
“MONO” is also cancelled when you change the frequency.
≥
This setting can be preset for each broadcasting station.
SCBT737_337_230GN_VQT2Q55.book 29 ページ ２０１０年２月２３日 火曜日 午後５時２２分
