Panasonic S-160PE1R5B, Технические данные и руководство по обслуживанию

Страница: 259 / 274

8 8
Control of 2WAY SYSTEM
2. Wireless Remote Controller
Matching up Addresses
Setting Remote Controller Addresses
1. If you press
and at the same time , “ ” will blink.
2. While holding down, every time you press , it cycles from ALL 1 2 3…
Set it to the receiver address switch of the indoor unit you wish to operate.
3. When you release , the address that was displayed is set.
When you do this, if it corresponds to the receiver’s address setting, the buzzer sounds.
6 ALL.
Address
Display on the
Remote
Controller
CZ-RWSC3
Position of
the Receiver’s
Address Switch The position of the
receiver’s address
switch does not
matter.
For 1, 2 and 3, set the switch on the
left and for 4, 5 and 6, to the right.
• Please do not hold the [Emergency Operation] button of the indoor unit down while the indoor unit’s display lamps are
blinking one after another.
• Make sure to operate while the indoor unit is stopped.
• The address of indoor unit is set to "ALL" at the time of the shipment.
NOTE
8-23
SM830277-00_大洋州向け R32シングル_TD&SM.indb 23 19/02/12 10:54:29