Panasonic S-160PE1R5B, Технические данные и руководство по обслуживанию

Страница: 90 / 274

1-11-2-1-1
1 1
Indoor Unit
SELECTING THE INSTALLATION SITE
Type E1
1. S-160PE1R5B
●
areas where leakage of fl ammable gas may be expected.
●
places where large amounts of oil mist exist.
●
direct sunlight.
●
locations near heat sources which may affect the
performance of the unit.
●
locations where external air may enter the room directly. This
may cause “condensation” on the air discharge ports, causing
them to spray or drip water.
●
locations where the remote controller will be splashed with
water or affected by dampness or humidity.
●
installing the remote controller behind curtains or furniture.
●
locations where high-frequency emissions are generated.
●
select an appropriate position from which every corner of the
room can be uniformly cooled.
●
select a location where the ceiling is strong enough to
support the weight of the unit.
●
make sure to install protective guards on the suction and discharge side
to prevent somebody from touching the fan blades or heat exchanger.
●
select a location where tubing and drain pipe have the
shortest run to the outdoor unit.
●
allow room for operation and maintenance as well as
unrestr icted air fl ow around the unit.
●
the limitation of the tubing length between the indoor and the
outdoor units should be referred to the Installation Instructions
of the outdoor unit.
●
allow room for mounting the remote controller about 1m off
the floor, in an area that is not in direct sunlight or in the flow
of cool air from the indoor unit.
100cm
60cm
60cm
Fig. 1-11-2-1-1
AVOID:
DO:
SM830277-00_大洋州向け R32シングル_TD&SM.indb 1 2019/02/27 11:50:56