ENGLISH - 35
Powering On the Projector
Before switching on the projector, make sure all the other devices are correctly connected. (
Æ
pages 30 - 32)
2)
1)
3)
3)
1) Connect the power cord to the projector body.
2) Connect the power plug to an outlet.
f
The power indicator <ON(G)/STANDBY(R)> lights in red, and the projector will enter the standby mode.
3) Press the power <
v
/
b
> button on the control panel or on the remote control.
f
The power indicator <ON(G)/STANDBY(R)> blinks in red, after a while the indicator lights in green.
f
The startup display appears on the screen and the count down starts, and the image will be projected on the screen
after the countdown.
Note
f
During count down, all the buttons are not available except for the power <
v
/
b
> button.
A PIN code input screen appears
If the [PIN code] of the projector has been set, the PIN code input screen will be displayed after the completion of the startup
display. Please enter a PIN code as the following steps.
1) Press the <ENTER> button.
2) Press
as
to select the number from 0 to 9.
3) Press the <ENTER> button.
f
The fixed number changes to
, and the cursor moves to the next frame.
4) Repeat the above steps to enter a three-digit number.
f
Move the cursor to [Set] when fixed a three-digit number.
5) Press the <ENTER> button.
f
The image will be projected on the screen.
Note
f
When [PIN code lock] is set to [On] in [Security] menu, the PIN code input screen will be displayed after startup display. The
projector will turn off automatically when input an incorrect PIN code or without any operation within 3 minutes.
f
If you want to correct the digit, press the <MENU> button to reset the digit and then re-enter it.
f
Press the <ENTER> button after moving the cursor to [Cancel] to reset the all digits.
f
If you entered an incorrect digit, the digit (
) will turn red and reset, and then re-enter a digit.
f
The initial PIN code is "111".
Chapter 3 Basic Operations - Powering on/off
