ENGLISH - 75
Note
f
Please confirm with your network administrator before you connect to an existing network.
f
The following settings are set before the projector leaves the factory.
[DHCP]
Off
[IP address]
192.168.1.100
[Subnet]
255.255.255.0
[Gateway]
192.168.1.1
[DNS]
192.168.1.1
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings before chang
-
ing any settings.
1) Turn on the computer.
2) Make the network setting according to your system administrator.
f
If the projector settings are the default settings, the computer can be used with the following network settings.
[IP address]
192.168.1.101
[Subnet]
255.255.255.0
[Gateway]
192.168.1.1
Accessing from the Web browser
1) Activate the Web browser in the personal computer.
2) Enter the IP address set by the projector into the URL input field of the Web browser.
f
The [Network Display System] screen is displayed.
3) Click [Login] and enter the password in the [Password] column.
f
The factory default setting of the user name is “admin” (administrator rights) and the password is “admin”.
4) Click [Login].
f
The [System Status] page is displayed.
Note
f
You can click the upper right corner of the web browser screen to select the display language.
f
Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector
from multiple computers.
f
Change the password first. (8 half-width characters) (
x
page 76)
f
If the screen for the web control is not displayed, consult your network administrator.
Chapter 4 Settings - Network control
