102 - ENGLISH
Ceiling mount bracket safeguards
f
When installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket for Projectors.
Model No.:
ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL420B (Projector Mount Bracket)
f
When installing the projector, attach the drop-prevention kit included with the Ceiling Mount Bracket for Projectors.
f
Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f
Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not
manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector
has not expired.
f
Unused products must be removed promptly by a qualified technician.
f
Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric
screwdrivers or impact screwdrivers.
f
Read the Installation Instructions for the Ceiling Mount Bracket for Projectors for details.
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
Bottom View
Model No. of Ceiling mount bracket: ET-PKL100H (for high ceilings)
ET-PKL100S (for low ceilings)
ET-PKL420B (Projector mount bracket)
M4 × 0.7
10 mm (13/32")
Torque: M4 1.25 ± 0.2 N·m
Attention
f
The above figure shows the attaching of the rubber cap to the fixing screw hole of the ceiling mount bracket. Before installing
the ceiling mount bracket, remove the rubber cap first and then attach the projector mount bracket.
f
If the projector will be used for the desktop instead of for the ceiling, the rubber cap will be necessary to prevent burning.
Save it for future use.
f
When ceiling mounting is not needed, please do not touch or remove the rubber cap in order to prevent burning.
Rubber cap
Chapter 6 Appendix - Ceiling mount bracket safeguards
