background image

Read this first!

2 - ENGLISH

Read this first!

WARNING:

THIS APPARATUS MUST BE EARTHED.

WARNING: 

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain 

or moisture.

This device is not intended for use in the direct field of view at visual display workplaces. To avoid 

incommoding reflexions at visual display workplaces this device must not be placed in the direct 

field of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1.  Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. 

 To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified 

service personnel.

3.   Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing 

type mains plug. This plug will only fit an earthing-type mains socket. This is a safety feature. If you are un

-

able to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing 

plug.

CAUTION:

To assure continued compliance, follow the attached installation instructions. This includes using 

the provided power cord and shielded interface cables when connecting to computer or peripheral 

devices. Also, any unauthorized changes or modifications to this equipment could void the user's 

authority to operate this device.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 

TO RAIN OR MOISTURE.

o

AVERTISSEMENT:

RISQUE DE CHOC 

É

LECTRIQUE

NE PAS OUVRIR.

WARNUNG:

ZUR VERMEIDUNG EINES 

ELEKTRISCHEN SCHLAGES GERÄT NICHT ÖFFNEN.

ПРЕДУПРЕЖДЕНИЕ

:

ОПАСНОСТЬ ПОРАЖЕНИЯ

ЭЛЕКТРИЧЕСКИМ ТОКОМ НЕ ОТКРЫВАТЬ.

경고

:

감전 위험이 있으므로 열지마십시오.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the 

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric shock to persons.

7

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 

important operating and maintenance (servicing) instructions in the literature accompanying the 

product.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a 

domestic environment.

Directive 2009/125/EC

Importer's name and address within the European Union 

Panasonic Marketing Europe GmbH

Panasonic Testing Center

Winsbergring 15, 22525 Hamburg, Germany

Содержание PT-TW250









































































































Отзывы: