Panasonic PT-TMZ400, Руководство по эксплуатации, Страница: 99 / 161

Setting the administrator account for the first time
Set the user name and password of the administrator account.
1) Press
as
to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f
The [ADMINISTRATOR ACCOUNT] screen is displayed.
3) Press
as
to select [USER NAME], and press the <ENTER> button.
f
The [USER NAME] screen is displayed.
f
The factory default setting of user name is “dispadmin”.
4) Press
asqw
to select a character, and press the <ENTER> button.
f
Up to 16 characters can be entered.
5) After entering the user name, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
6) Press
as
to select [PASSWORD], and press the <ENTER> button.
f
The [PASSWORD] screen is displayed.
7) Press
asqw
to select a character, and press the <ENTER> button.
f
Up to 16 characters can be entered.
f
The password cannot be blank.
8) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The [ADMINISTRATOR ACCOUNT] screen is displayed.
9) Press
as
to select [PASSWORD CONFIRM], and press the <ENTER> button.
f
The [PASSWORD CONFIRM] screen is displayed.
10) Enter the password entered in Step 7).
11) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.
f
The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
13) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
For restrictions on character strings that can be set for password, refer to [PASSWORD POLICY] (
x
page 98).
f
If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
f
The user name and password of a standard user account without administrator rights can be set on the [Set up password] page
(
x
page 128) of the web control screen.
Changing settings of the administrator account
Change the user name and password of the administrator account.
1) Press
as
to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f
The [ADMINISTRATOR ACCOUNT] screen is displayed.
3) Press
as
to select [USER NAME] under [CURRENT], and press the <ENTER> button.
f
The [USER NAME] screen is displayed.
4) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter the current user name.
5) After entering the user name, press
asqw
to select [OK], and press the <ENTER> button.
f
The [ADMINISTRATOR ACCOUNT] screen is displayed.
ENGLISH - 99
Chapter 4 Settings - [NETWORK] menu