Panasonic PT-TMZ400, Руководство по эксплуатации

Страница: 113 / 161

Using the QR code
A smartphone can be connected to the projector via wireless LAN just by reading the QR code that the projector
displays with the camera on a smartphone.
r
Compatible devices
iPhone: iOS 11 or later
Android devices: Android 7.0 or later
Note
f
A device supporting reading of a QR code and application software of the camera supporting reading of a QR code are required.
f
For the devices that the operation has been verified with this projector, visit the website (https://panasonic.net/cns/projector/). Note that
the verification for devices of other manufacturers has been made for the items set by Panasonic Connect Co., Ltd., and not all the
operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective
manufacturers.
f
The QR code cannot be used for connecting the application software “Wireless Projector” to the projector.
r
Displaying the QR code in OSD
The following is the operation of the projector when reading the QR code displayed in the on-screen menu (OSD).
1) Press the <MENU> button to open the [NETWORK] menu from the main menu.
f
The [NETWORK] screen is displayed.
2) Press
as
to select [NETWORK STATUS], and press the <ENTER> button.
f
The [NETWORK STATUS] screen is displayed.
3) Press
as
to switch the displayed screen and display [WIRELESS LAN] (page 2/3).
f
The QR code is displayed.
Network Display9829
172.28.120.1
2/3
POSITION
PICTURE
PT-TMZ400
NETWORK STATUS
WIRELESS LAN
SSID
IP ADDRESS
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
SELECT
RETURN
ASSIGNED FUNCTION:
DISABLE
Note
f
The SSID, IP address (wireless) and QR code are not displayed in following cases.
g
When the optional wireless module (Model No.: AJ-WM50) is not attached to the <USB (VIEWER/WIRELESS/DC OUT)> terminal
g
When the web control → [Network config] → [WIRELESS LAN] is set to [DISABLE] (
x
page 122)
r
Displaying the QR code in the network input idle screen
The following is the operation of the projector when reading the QR code displayed in the network input idle
screen.
1) Press the <NETWORK/USB> button to switch to NETWORK input.
f
You can also press the <INPUT SELECT> button on the control panel and the input guide is displayed, then
press
asqw
to switch to NETWORK input.
f
The QR code is displayed.
LOGIN PASSWORD : 5678
PROJECTOR NAME : Name1234
SSID : Network Display9829
IP ADDRESS(WIRELESS) : 172.28.120.1
IP ADDRESS(WIRED) : 192.168.1.100
ENGLISH - 113
Chapter 5 Operation of Function - Network connection