Panasonic PT-MZ20K, Руководство по эксплуатации

Страница: 146 / 279

Chapter 4 Settings — [PROJECTOR SETUP] menu
146 - ENGLISH
[FILTER COUNTER]
Check the runtime of the filter and set the cleaning/replacement cycle of the filter. Also, the runtime of the filter can
be reset.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The
[FILTER COUNTER]
screen is displayed.
[FILTER COUNTER] Displays the runtime of the filter.
[TIMER] Sets the cleaning/replacement cycle of the filter.
[FILTER COUNTER RESET] Reset the runtime of the filter.
Setting [TIMER]
If the filter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the filter reaches
the set time, a message prompting to clean/replace the filter [FILTER COUNTER has reached the set time.] is
displayed on the projected image.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Select this item when a message is not to be displayed.
[1000 H] - [20000 H]
Select this item when a message is to be displayed. The cleaning/replacement cycle of the filter can
be set in 1 000 hour intervals.
Resetting [FILTER COUNTER]
Reset the runtime of the filter.
1) Press
as
to select [FILTER COUNTER].
2) Press the <ENTER> button.
f
The [FILTER COUNTER] screen is displayed.
3) Press
as
to select [FILTER COUNTER RESET].
4) Press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
f
Display of [FILTER COUNTER] will change to [0 H].
[STATUS]
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The [STATUS] screen is displayed.
3) Press
qw
to switch the pages.
f
The page will change each time you press the button.
[PROJECTOR TYPE] Displays the type of the projector.
[SERIAL NUMBER] Displays the serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.