Connections
30 - ENGLISH
Getting Started
Before connecting to the projector
z
Read carefully the instruction manual for the device to be connected.
z
Turn off the power switch of the devices before connecting cables.
z
If any connection cable is not supplied with the device, or if no optional cable is available for the connection of
the device, prepare a necessary system connection cable.
z
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In
this case, a time base corrector (TBC) must be connected.
z
The projector accepts video signals, S-video signals, analog RGB signals (with TTL sync. Level), and digital
signals.
z
Some computer models are not compatible with the projector.
z
Refer to “List of compatible signals” (
page 114) for the types of video signals that can be used with the
projector.
▶
■
<S-VIDEO IN> terminal pin assignments and signal names
Outside view
Pin No.
Signal name
(1)
(2)
(3)
(4)
(1)
GND (luminance signal)
(2)
GND (color signal)
(3)
Luminance signal
(4)
Color signal
▶
■
<COMPUTER IN> terminal pin assignments and signal names
Outside view
Pin No.
Signal name
(4)
and
(9)
are not used.
(5)
-
(8)
,
(10)
, and
(11)
are GND
terminals.
(10)
(6)
(10)
(6)
(11)
(15)
(1)
(5)
(1)
R/P
R
(2)
G/G, SYNC/Y
(3)
B/P
B
(12)
DDC data
(13)
HD/SYNC
(14)
VD
(15)
DDC clock
Connections
