background image

Precautions for Use

ENGLISH - 

13

Important 

 

Information

Cautions when setting the projectors

 

J

 

z

Do not stack the projectors.

Do not block the ventilation ports (intake and exhaust) of the 

 

z

projector.

Avoid heating and cooling air from the air conditioning system 

 

z

directly blow to the ventilation ports (intake and exhaust) of the 

projector.

Make sure that there is no object under the projector to prevent 

 

z

from covering the bottom openings. 

SERIAL IN

COMPUTER IN /

COMPONENT IN

VIDEO IN

S-VIDEO IN

SERIAL IN

COMPUTER IN /

COMPONENT IN

VIDEO IN

S-VIDEO IN

Do not place the projector in an enclosed space. 

 

z

If you need to place the projector in an enclosed space, additional air conditioning and ventilation system 

must be equipped. When ventilation is insufficient, remaining heat may trigger the protection circuit of the 

projector.

Security

Take safety measures against following incidents.

 

J

Personal information being leaked via this product.

 

z

Unauthorized operation of this product by a malicious third party.

 

z

Interfering or stopping of this product by a malicious third party.

 

z

Security instruction (

 

J

Æ

page 52)

Make your password as difficult to guess as possible.

 

z

Change your password periodically.

 

z

Panasonic or its affiliate company never inquires a password directly to a customer. Do not tell your password 

 

z

in case you receive such an inquiry.

Set a password and restrict the users who can log in.

 

z

Disposal

When disposing of the product, ask your local authority or dealer about the correct methods of disposal.

The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or dealer

about proper disposal of the unit.

Dispose of used batteries according to the instructions or your local disposal rule or guidelines. 

SERIAL IN

COMPUTER IN /

COMPONENT IN

VIDEO IN

S-VIDEO IN

SERIAL IN

COMPUTER IN /

COMPONENT IN

VIDEO IN

S-VIDEO IN

over 1 m

(40")

over 20 cm

(7.8")

over 50 cm 

(20")

over 1 m (40")

Содержание PT-LX22U











































































Отзывы: