Panasonic PT-LRW35, Руководство по эксплуатации

Страница: 78 / 114

78 - ENGLISH
[Off] The projector only searches for the input selected.
[On]
The projector automatically searches for all the input until an available input with input signal is
found. After an available input with input signal is found, you can press any input selection button
on the remote control or the <INPUT SELECT> button on the control panel to automatically find
the next input with input signal.
[Input]
Set the input source.
1) Press
as
to select [Options].
2) Press
w
or the <ENTER> button.
3) Press
as
to select [Input].
4) Press
w
or the <ENTER> button.
f
The [Input] screen is displayed.
5) Press
as
to switch the item.
f
The items will switch each time you press the button.
[HDMI 1 IN]
Set the input to HDMI 1 IN.
[HDMI 2 IN]
Set the input to HDMI 2 IN.
[COMPUTER 1 IN] Set the input to COMPUTER 1 IN.
[COMPUTER 2 IN] Set the input to COMPUTER 2 IN.
[VIDEO IN] Set the input to VIDEO IN.
6) Press the <ENTER> button.
f
The selected input will be projected.
[High Altitude]
Change the setting according to the altitude in which you use the projector.
1) Press
as
to select [Options].
2) Press
w
or the <ENTER> button.
3) Press
as
to select [High Altitude].
4) Press
w
or the <ENTER> button.
f
The [High Altitude] screen is displayed.
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[Off] When using the projector below 1 400 m (4 593') above sea level.
[High 1]
*1
When using the projector between 1 400 m (4 593') and 2 100 m (6 890') above sea level.
[High 2]
*1
When using the projector between 2 100 m (6 890') and 2 700 m (8 858') above sea level.
[High]
*2
When using the projector between 1 400 m (4 593') and 4 200 m (13 780') above sea level.
*1 Available only when the [Picture] menu → [Image Settings] → [Light Power] is set to [Normal].
*2 Available only when the [Picture] menu → [Image Settings] → [Light Power] is set to [Eco] or [Quiet].
Note
f
Set [High Altitude] properly according to the setting of [Light Power] and the altitude at which the projector is being used. Failure to do so
may shorten the life of the internal parts and result in malfunctions.
f
When [Light Power] is set to [Normal], do not set the projector at 2 700 m (8 858') or higher above sea level. Failure to do so may shorten
the life of the internal parts and result in malfunctions.
f
When [Light Power] is set to [Eco] or [Quiet], do not set the projector at 4 200 m (13 780') or higher above sea level. Failure to do so may
shorten the life of the internal parts and result in malfunctions.
f
When it is set to [High], [High 1] or [High 2], the fan noise becomes louder and fan speed increases.
[Logo]
Set whether to display the logo on the projector startup screen.
Chapter 4 Settings - [Setup] menu