56 - ENGLISH
[Picture] menu
On the menu screen, select [Picture] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 53) for the operation of the menu screen.
[Image Settings]
Set the image settings.
1) Press
as
to select [Image Settings].
2) Press
w
or the <ENTER> button.
f
The
[Image Settings]
screen is displayed and you can select an item for setting.
Note
f
If no signal is detected, then [Image Settings] menu items are hidden.
[Picture Mode]
You can switch to the desired picture mode most suitable for the image source and the environment in which the
projector is used.
1) Press
as
to select [Picture Mode].
2) Press
w
or the <ENTER> button.
f
The
[Picture Mode]
screen is displayed.
3) Press
as
to switch the item.
f
The items will switch each time you press the button.
[Standard]
The picture becomes suitable for movie-based images in general.
[Cinema]
Select this mode to provide the best colors for watching movies.
[Natural]
Select this mode for natural looking colors with a balance of warm and cool tones.
[Rec709]
Select this mode to match the REC.709 color standard as closely as possible.
[DICOM SIM.]
Select this mode for viewing monochrome medical images such as X-rays, MRIs, etc.
[Dynamic]
Select this mode to increase contrast when viewing gray or dark contents.
[Graphic]
Select this mode to display PC / Photo sources.
[Black Board]
Select this mode to achieve optimum color settings when projecting onto a black board.
[White Board]
Select this mode to achieve optimum color settings when projecting onto a white board.
[User]
Select this mode for user customized color setting.
[3D]
This item can be selected only when the 3D function is enabled. To experience 3D you need DLP
Link 3D glasses and video source capable of sending 3D content.
Note
f
Rec709 is an abbreviation of “ITU-R Recommendation BT.709” and is color standard of high-definition television.
f
DICOM is an abbreviation of “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.
f
If the [Picture Mode] is set to [3D], the other items under [Picture Mode] are grayed out.
f
If the high refresh rate (96 Hz or higher) signal is input, only [Cinema] can be selected.
[Brightness]
You can adjust the dark (black) part of the projected image.
1) Press
as
to select [Brightness].
2) Press
w
or the <ENTER> button.
f
The
[Brightness]
screen is displayed.
3) Press
qw
to adjust the level.
Operation
Adjustment
Adjustment range
Press the
w
button.
Increases the brightness of the dark (black) parts of the screen.
-20 ~ 20
Press the
q
button.
Reduces the brightness of the dark (black) parts of the screen.
Chapter 4 Settings - [Picture] menu
Содержание PT-LRW35
Страница 38: ...38 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 83: ...ENGLISH 83 Chapter 5 Operation of Function This chapter describes the operation methods of some functions ...
Страница 99: ...ENGLISH 99 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...
