Panasonic PT-LRW35, Руководство по эксплуатации

Страница: 71 / 114

ENGLISH - 71
5) Press
as
to select one item to set.
[USB Power] Enables or disables the USB power function when the projector is in normal standby mode.
[Audio Out] Enables or disables audio out function when the projector is in normal standby mode.
[Speaker] Enables or disables speaker function when the projector is in normal standby mode.
[Computer Out] Enables or disables Computer Out function when the projector is in normal standby mode.
[Quick Startup] Enables or disables the [Quick Startup] function when the projector is in normal standby mode.
6) Press
w
or the <ENTER> button.
7) Press
qw
to switch the item.
f
The sub items will switch each time you press the button.
[Off]
Disables the selected function.
[On] Enables the selected function.
Note
f
[Normal Standby] can be set only when [Standby Mode] is set to [Normal].
f
When [USB Power], [Audio Out], [Speaker], [Computer Out] and [Quick Startup] are all set to [Off], some RS-232C commands cannot be
used during standby.
f
When any one of [USB Power], [Audio Out], [Speaker], [Computer Out] and [Quick Startup] is set to [On], all RS-232C commands can be
used during standby.
f
[Quick Startup] is forcibly set to [On] if any one of [USB Power], [Audio Out], [Speaker] and [Computer Out] is set to [On]. After that, [Quick
Startup] remains at [On] even if any one of [USB Power], [Audio Out], [Speaker] and [Computer Out] is set to [Off].
f
When [Quick Startup] is set to [On], the power consumption during normal standby becomes high during the period when the [Quick
Startup] function is valid.
[Security]
Perform security settings.
[Security]
Set whether or not to enable the security password entry.
If the security password entry is enabled, the password input screen will be displayed and the security password
is required for the following cases.
f
Connect the power plug to the outlet and turn the power on.
f
Execute the [Setup] menu → [Reset] → [Reset to Default].
f
Execute the [Network] menu → [LAN] → [Reset].
f
Set [Change Password].
1) Press
as
to select [Security].
2) Press
w
or the <ENTER> button.
3) Press
as
to select [Security].
4) Press
w
or the <ENTER> button.
f
The password input screen is displayed.
5) Press
asqw
or the number buttons (<0>-<9>) to enter the 4-digit password, and press the <ENTER>
button.
f
The [Security] individual adjustment screen is displayed.
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[Off]
Disables the security password entry.
[On]
Enables the security password entry.
Note
f
The initial security password is “1234”.
f
A warning message is displayed on the screen and the projector powers off automatically in 10 seconds if you input an incorrect password
consecutively for three times.
Chapter 4 Settings - [Setup] menu