Panasonic PT-JX200FBE, Инструкция по эксплуатации (Функциональное руководство)

Страница: 82 / 144

Chapter 4 Settings — [NETWORK] menu
82 - ENGLISH
[WIRELESS LAN]
Displays the network information of the wireless LAN set on the projector.
[ANTENNA LEVEL] Displays the signal status of wireless LAN.
[NETWORK] Displays the connection method of wireless LAN.
[CHANNEL] Displays the channel used for wireless LAN.
[SSID] Displays the string of SSID.
[AUTHENTICATION] Displays the user authentication method.
[EAP] Displays the type of EAP.
[ENCRYPTION] Displays the encryption method.
[DEFAULT KEY] Displays the number of the default key.
[DHCP] Displays the status of use of DHCP server.
[IP ADDRESS] Displays the IP address.
[SUBNET MASK] Displays the subnet mask.
[DEFAULT GATEWAY] Displays the default gateway.
[DNS1] Displays the address of the primary DNS server.
[DNS2] Displays the address of the secondary DNS server.
[MAC ADDRESS] Displays the MAC address of wireless LAN.
Note
f
When [DISABLE] is selected in the [NETWORK] menu → [WIRELESS LAN] (
x
page 76) and an item other than [WIRELESS LAN] is
selected in [Art-Net] (
x
page 82), the wireless LAN page on the [NETWORK STATUS] screen is not displayed.
f
If the string of SSID exceeds 16 characters, the SSID will be displayed in two lines.
[Art-Net]
Make settings to use the Art-Net function.
1) Press
as
to select [Art-Net].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Disables the Art-Net function.
[WIRED LAN] Uses the Art-Net function with wired LAN connection.
[WIRELESS LAN] Uses the Art-Net function with wireless LAN connection.
Note
f
Refer to “Setting address for [WIRED LAN]” (
x
page 82) or “Setting address for [WIRELESS LAN]” (
x
page 83) for how to set the IP
address.
f
If [Art-Net] is set to other than [OFF], the [NETWORK] menu → [WIRED LAN] (
x
page 75) or [WIRELESS LAN] (
x
page 76) is
disabled.
Setting address for [WIRED LAN]
1) Press
as
to select [Art-Net].
2) Press
qw
to select [WIRED LAN].
3) Press the <ENTER> button.
f
The [Art-Net (WIRED LAN)] screen (1/2) is displayed.
4) Press
as
to select each item, and change the settings according to the operation instructions of the
menu.
[NET] Enter the net setting of the control console to be connected to the projector.
[SUB NET] Enter the subnet setting of the control console to be connected to the projector.
[UNIVERSE] Enter the universe setting of the control console to be connected to the projector.
[START ADDRESS] Enter a start address where the projector processes Art-Net.
5) Press
as
to select [NEXT], and press the <ENTER> button.
f
The [Art-Net (WIRED LAN)] screen (2/2) is displayed.
6) Press
as
to select [DEVICE IP ADDRESS].