Chapter 4
Settings — Menu navigation
52 - ENGLISH
f
For some items, press
qw
to display an individual adjustment screen with a bar scale as shown below.
0
CONTRAST
ADJUST
Note
f
Pressing the <RETURN> or <MENU> button on the remote control while the menu screen is displayed returns the screen to the upper-level
menu.
f
Some items may not be allowed to adjust or use depending on the selected signal input to the projector. The menu items that cannot be
adjusted or used are shown in gray characters, and they cannot be selected.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to
“Main menu” (
x
page 52)
and “Sub-menu” (
x
page 53).
Resetting the adjusted value to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
0
CONTRAST
ADJUST
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the adjusted sub-menu items to the factory defaults at a time, perform the [SETUP] menu
→
[INITIALIZE] (
x
page 73).
f
Some items cannot be reset to the factory default settings even when the <DEFAULT> button on the remote control is pressed. Adjust those
items individually.
f
The square mark under the bar scale in the individual adjustment screen indicates the factory default value. The position of the square mark
varies by the input signal.
Current adjustment value
Factory default setting
Setting the on-screen display to show/hide
If you hold down the <MENU> button on the remote control for at least three seconds, the on-screen setup screen
appears and the on-screen display can be set to show/hide.
Main menu
The following nine items are included in the main menu. When a main menu item is selected, the screen changes
to a sub-menu selection screen.
Main menu item
Page
[PICTURE]
55
[LIGHTING]
59
[MEMORY VIEWER]
61
[SETUP]
63
[NETWORK]
75
[DISPLAY OPTION]
87
Содержание PT-JX200FBE
Страница 38: ...38 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 92: ...92 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Страница 126: ...126 ENGLISH Chapter 6 Maintenance This chapter describes troubleshooting and maintenance methods ...
Страница 131: ...ENGLISH 131 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...