Panasonic PT-D6000ELS, Руководство по обслуживанию

Страница: 224 / 224

80/80
Bit Name Description Condition of
Clear Bit
bit15 Warning of optical module
low temperature The ambient temperature in the place of use may be 0°C or lower.
If the temperature inside this projector does not rise within 5 minutes
after the turning on the lamp, the shutdown occurs. - Becomes
higher than
the warning
release
temperature
during
power-on.
- Power ON
bit14 Warning of optical module
high temperature
bit13 Warning of intake air high
temperature
bit12 Warning of exhaust air or
lamp surroundings high
temperature
The temperature inside this projector has become high. If the
temperature rises any further, the shutdown occurs.
- The ventilation holes may be closed.
- The ambient temperature in the place of use may be too high.
- The air filter may accumulate dust. - Becomes
lower than
the warning
release
temperature
during
power-on.
- Power ON
bit11 For test The value is undefined. MAIN
POWER ON
bit10 For extension The value is undefined.
－
bit09 ACF time warning The ACF runtime exceeds specified cumulative usage time, and
becomes a period when the air filter is replaced. Filter reset
bit08 Filter rotation error It failed in the air filter rewinding in ACF. Filter reset
or Power ON
bit07 LAMP2 time warning LAMP2 reset
bit06 LAMP1 time warning
It becomes a period when the lamp unit is replaced. Prepare a new
lamp unit. The shutdown will occur within 200 hours.
LAMP1 reset
bit05 Filter blocked error The air filter in ACF has no quantity, or it may accumulate dust. Filter reset
bit04 For extension The value is undefined.
－
bit03 Airflow sensor
disconnected
The airflow sensor has breaking of wire, or connector RL11 is
disconnected. MAIN
POWER ON
bit02 Color wheel rotation error The color wheel and/or color wheel drive circuit is abnormal. It is a
breakdown when not recovering even if the power is turned on again. Power ON
bit01 Cover open error Does the lamp unit cover open? Close the
lamp unit
cover and
turn on
MAIN
POWER.
bit00 For extension The value is undefined.
－
Parameters 2 (*6, *7, *8, *9)
For extension, the value is undefined.