E
NGLISH
-27
Basic
operation
26-E
NGLISH
NOTE:
B
During projection of an image, the cooling fan will operate, emitting a
small noise as it operates. Turning the lamp on or off will cause this
noise to increase a little.
B
By using the “OPTION” menu to set “LAMP POWER” to “LOW”, the
operating sound of the fan can be reduced. (Refer to page 47.)
B
You can also turn off the power by pressing the POWER button twice or
by holding it down for at least 0.5 seconds.
B
When the projector is in standby mode (the power indicator on the
projector is illuminated red), the projector continues to draw approximately
3.0 W of power even when the cooling fan has stopped.
˛
#
˛
$
˛
%
Turning off the power
Power indicator
Press the POWER button.
B
“POWER OFF” is displayed on the
screen.
Press the
I
I
or
H
H
button to select “OK”, and
then press the ENTER button.
B
The lamp unit will switch off and the picture will stop being projected.
(The power indicator on the projector will illuminate orange while the
cooling fan is still operating.)
#
$
%
P O W E R O F F
O K
C A N C E L
Press the MAIN POWER switch to turn off the
power after the power indicator on the
projector illuminates red.
B
Do not cut power to the projector in any way while the cooling fan is
still operating. Be careful not to switch off the MAIN POWER switch
of the projector or unplug the mains lead from the mains socket.
Power indicator
Power indicator status
Red
Illuminated
The projector is in standby mode and image projection
is possible by pressing the POWER button.
A picture is being projected.
The lamp is cooling down after the power is turned
off. (The cooling fan is operating.)
The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated orange. (After a short period, a picture
will be projected.)
The projector is preparing for projection after the
power is turned on while the power indicator is
illuminated red. (After a short period, a picture will be
projected.)
Flashing
Illuminated
Illuminated
Flashing
Green
Orange
Projector status