E
NGLISH
-7
Preparation
6-E
NGLISH
Do not do anything that might damage the mains lead or the mains
plug.
B
Do not damage the mains lead, make any modifications to it, place it near
any hot objects, bend it excessively, twist it, pull it, place heavy objects on
top of it or wrap it into a bundle.
B
If the mains lead is used while damaged, electric shocks, short-circuits or
fire may result.
B
Ask an Authorised Service Centre to carry out any repairs to the mains
lead that might be necessary.
Do not handle the mains plug with wet hands.
B
Failure to observe this may result in electric shocks.
Insert the mains plug securely into the mains socket.
B
If the plug is not inserted correctly, electric shocks or overheating could
result.
B
Do not use plugs which are damaged or mains sockets which are coming
loose from the wall.
Do not place the projector on top of surfaces which are unstable.
B
If the projector is placed on top of a surface which is sloped or unstable, it
may fall down or tip over, and injury or damage could result.
Do not place the projector into water or let it become wet.
B
Failure to observe this may result in fire or electric shocks.
Do not place liquid containers on top of the projector.
B
If water spills onto the projector or gets inside it, fire or electric shocks
could result.
B
If any water gets inside the projector, contact an Authorised Service
Centre.
Do not insert any foreign objects into the projector.
B
Do not insert any metal objects or flammable objects into the projector or
drop them onto the projector, as doing so can result in fire or electric
shocks.
Keep the batteries out of the reach of infants.
B
If the batteries are swallowed, death by suffocation may result. If you
believe that the batteries may have been swallowed, seek medical advice
immediately.
Do not allow the + and - terminals of the batteries to come into contact
with metallic objects such as necklaces or hairpins.
B
Failure to observe this may cause the batteries to leak, overheat, explode
or catch fire.
B
Store the batteries in a plastic bag and keep them away from metallic
objects.
During a thunderstorm, do not touch the projector or the cable.
B
Electric shocks can result.
Do not use the projector in a bath or shower.
B
Fire or electric shocks can result.
Do not look into the lens while the projector is being used.
B
Strong light is emitted from the projector’s lens. If you look directly into this
light, it can hurt and damage your eyes.
B
Be especially careful not to let young children look into the lens. In
addition, turn off the power and disconnect the mains plug when you are
away from the projector.
Do not place your hands or other objects close to the air outlet port.
B
Heated air comes out of the air outlet port. Do not place your hands or
face, or objects which cannot withstand heat close to this port, otherwise
burns or damage could result.
When replacing the lamp, allow it to cool for at least one hour before
handling it.
B
The lamp cover gets very hot, and touching it can cause burns.
Before replacing the lamp, be sure to disconnect the mains plug from
the mains socket.
B
Electric shocks or explosions can result if this is not done.
Caution
Do not cover the air inlet port or the air outlet port.
B
Doing so may cause the projector to overheat, which can cause fire or
damage to the projector.
B
Do not place the projector in narrow, badly ventilated places such as
closets or bookshelves.
Do not set up the projector in humid or dusty places or in places where
the projector may come into contact with smoke or steam.
B
Using the projector under such conditions may result in fire or electric
shocks.
When disconnecting the mains lead, hold the plug, not the lead.
B
If the mains lead itself is pulled, the lead will become damaged, and fire,
short-circuits or serious electric shocks may result.
Always disconnect all cables before moving the projector.
B
Moving the projector with cables still attached can damage the cables,
which could cause fire or electric shocks to occur.
Do not place any heavy objects on top of the projector.
B
Failure to observe this may cause the projector to become unbalanced
and fall, which could result in damage or injury.
Do not short-circuit, heat or disassemble the batteries or place them
into water or fire.
B
Failure to observe this may cause the batteries to overheat, leak, explode
or catch fire, and burns or other injury may result.
