E
NGLISH
-25
Basic
operation
Press the input select button to select the input signal.
B
A picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
&
Input select
button
Changing
signals
Input select
button
Changing
signals
Control
panel
Remote
control
unit
VIDEO
VIDEO
S-VIDEO
YP
B
P
R
HDMI
SCART
PC
VIDEO
S-VIDEO
CMPNT
YP
B
P
R
SCART
PC
HDMI
˛
$
˛
&
˛
(
˛
'
˛
(
˛
*
˛
)
˛
#
Turning on the power
Before turning on the power
1. Ensure that all peripheral
devices are connected properly.
2. Connect the accessory mains lead.
3. Remove the lens cover.
Lens cover
Mains lead
Press the MAIN POWER switch to turn on the
power.
B
The power indicator on the projector will illuminate red.
Press the POWER button.
B
The power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
Turn on the power of all connected devices.
B
Start the play function of a device such as a DVD player.
NOTE:
B
A rattling sound may be heard when the power is turned on, and a
tinkling sound may be heard when the lamp unit is turned on, but these
are not signs of malfunctions.
#
$
%
Power indicator
24-E
NGLISH
Adjusting the size
B
Turn the zoom ring to adjust
the size of the projected image.
Adjusting the focus
B
Turn the focus ring to adjust
the focus of the projected image.
(
)
*
Adjusting the angle
B
The position of the projected image
(upward and downward) can be fine
adjusted by turning the front
adjustable legs.
B
If the projected image contains
keystone distortion, adjust
“KEYSTONE” (refer to page 28 for
details).
'
Adjusting the lens shift
B
Use the shift lever to adjust the
position of the projected image.
B
Turn the shift lever right to secure
the shift lever.
˛
(
˛
(
˛
)
Zoom
˛
*
Focus
˛
'
