Panasonic PN28160K, Руководство по эксплуатации

Страница: 42 / 281

42
Available commands are listed below.
I Set/edit the IP address.
Press "I." The command prompt changes to "Enter IP address>." Enter an IP address
for the Switching Hub.
M Set/edit the subnet mask.
Press "M." The command prompt changes to "Enter subnet mask>." Enter a subnet
mask for the Switching Hub.
G Set/edit the IP address of the router for the default gateway.
Press "G." The command prompt changes to "Enter new gateway IP address>."
Enter the IP address of the router, set as the default gateway.
A Set the IP address, subnet mask and default gateway in succession.
Press "A." The command prompt changes to "Enter IP address>." Enter the IP
address of the Switching Hub. Then, the command prompt changes to "Enter
subnet mask>." Enter the subnet mask. Then, the command prompt changes to
"Enter new gateway IP address>." Enter the IP address of a router, used as a default
gateway.
Q Return to the previous menu.
Note: This item must be set in order to use the SNMP management
functionality and to enable a remote connection by Telnet or SSH. Any
IP addresses on the local network must be unique and no duplication
is allowed. If you are unsure, consult the network administrator.