23
Before Starting
Contents
RESET Key
Resets each selected copy/
scan modes to default
settings.
SET Key
Sets the parameter(s) of
Function settings.
FUNCTION Key
Use when changing the
paper size, initial function
values (default values) and
key operator settings.
ALARM LED (RED)
Lights/Flashes when trouble
occurs.
Lights:
Machine detected a trouble
status
●
No paper in the selected
tray or toner has run out.
●
Machine detected trouble,
such as paper misfed or
jammed.
Flashes:
Machine detected an alarm
status
●
No paper in the Tray.
(Tray not selected)
●
Toner is getting low, etc.
Used to Fax and Internet
Fax/Email Functions.
N in 1 Key
Selects N in 1 copy mode.
(See page 29)
PAPER TRAY Key
Selects the paper tray.
Icon
Contents
Keypad
Sets copy quantities or
inputs the parameter(s)
of Function settings.
CLEAR Key
Clears the copy count in the
display.
ACTIVE LED (GREEN)
Flashes when machine is
active.
PRINT DATA LED (GREEN)
Flashes:
When receiving printing
data.
Lights:
While printing.
SCAN/FILE Key
Used for network scanning.
(See pages 46-50)
DOUBLE EXPOSURE Key
Selects Double Exposure
mode. (See page 29)
COPY SIZE Key
Sets the Reduction/
Enlargement copy with
preset ratio.
(See page 25)
Icon
No.
No.
17
18
Keyboard
Inputs the Station, Machine name(s) of the
parameter settings, etc. (See pages 47 - 51)
19
20
21
22
23
24
25
28
29
30
31
When inputting a special character, press the "_/()..." Key and use the ( / )
Cursor Keys to select a character.
When changing the stored character, move the cursor ( ) back to the character
and press the CLEAR Key then input a new character.
26
27
NOTE:
To adjust the character brightness of the LCD display, press and while holding down the
CLEAR Key, keep pressing the ORIGINAL SIZE or COPY SIZE Key until the desired brightness
is achieved.
ORIGINAL SIZE : Lighter
COPY SIZE
: Darker
Содержание Panafax UF-9000
Страница 65: ......
