Panasonic Panafax UF-7000, Руководство по обслуживанию

Страница: 72 / 374

72
UF-7000/8000
APR 2007 Ver. 2.1
UF-7100/8100
3.4. Preventive Maintenance Check List
The chart outlined below is a general guideline for maintenance. The list is for an average usage of 50
transmitted and received documents per day. Needless to say, the environmental conditions and actual use
will vary these factors. The chart below is for reference only.
Note:
1. Wet Cloth represents a soft cloth saturated with water.
For stubborn toner accumulation, wipe with a soft cloth saturated with Isopropyl Alcohol first, then
follow up with a soft cloth saturated with water.
2. The Maintenance Cycle is based on the Counter Information for each individual module.
To verify the counter information, print the Total Counter List using the Service Mode: F7 - Electronic
Counter - 00 (List Print).
3. Cleaning, Replacement and Adjustment Cycle (Sheet) are based on using Panasonic's recommended
standard paper and supplies. These cycles may vary with the kind of paper used, Paper size,
orientation, print duty, continuous/interval print and/or ambient conditions.
No.
Preventive
Maintenance
Parts
Ref.
No.
Cleaning Replacement/Adjustment
Ref.
Counter
Cycle
(Sheet)
Method
Cycle
(Sheet)
Procedure
ADF Unit
1 Pick Up Roller 416 10K Wet soft cloth 85K
Refer to
2.2.1.
F7-08
2 Feed Roller 419 10K Wet soft cloth 85K
3 Separation Roller 403 10K Wet soft cloth 85K
4 ADF Pad 401 10K Dry soft cloth -
Paper Feed Module
5 Pick Up Roller 1416 10K Wet soft cloth 85K Refer to
2.2.8.
F7-12
6 Separation Pad 1715 10K Wet soft cloth 85K
7 Bias Transfer Roller
(BTR)
1603 10K Dry soft cloth 85K
Refer to
2.2.9.
2nd Paper Feed Module
8 Pick Up Roller 1833 10K Wet soft cloth 85K Refer to
2.2.11.
F7-13
9 Separation Pad 1912 10K Wet soft cloth 85K
Fuser Unit
10 Fuser Unit 1330 - - 85K
Refer to
2.2.7.
F7-02