manualshive.com logo in svg

Panasonic Panafax UF-7000, Руководство по обслуживанию

Поделиться
Скачать
Panasonic Panafax UF-7000 Скачать руководство пользователя страница 195

195

UF-7000/8000

APR 2007

 Ver. 2.1

UF-7100/8100

6.3.5.

Fuser Unit

A 600W Heat Lamp (Halogen Lamp) heats the surface of the teflon-coated Heat Roller to approximately 
190

°

C (374

°

F), a Thermistor monitors the Heat Roller temperature, and the CPU controls the ON/OFF 

timing of the lamp.

The Thermostat is mounted 2.5mm away from the Heat Roller. If the ambient temperature reaches 190

°

C

 (374

°

F), the Thermostat is opened, and power is removed from the Heat Lamp. The surface of the 

Thermostat is not as hot as that of the Heat Roller. When the Thermostat opens, the surface of the Heat 
Roller may reach 210

°

C (410

°

F), and the system displays E4-01. If the Thermistor opens, the system 

displays 
E4-01. If by chance the Thermostat malfunctions a Thermal Fuse opens.
The Pressure Roller is kept in contact with the Heat Roller through 2 pressure springs, which apply a 
pressure of approximately 0.36 kg/cm (3.56 N/cm). Drive is supplied from the Main Motor via Intermediate 
Gears.

Содержание Panafax UF-7000























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды