manualshive.com logo in svg

Panasonic Panafax UF-7000, Руководство по обслуживанию

Поделиться
Скачать
Panasonic Panafax UF-7000 Скачать руководство пользователя страница 196

196

UF-7000/8000

APR 2007

Ver. 2.1

UF-7100/8100

6.3.6.

Paper Ejection and Paper Switchback

A. Normal Printing Mode (Not Duplex Mode)

After fusing, paper is fed to the Output Tray by the Upper Exit Roller and Upper Exit Pinch Roller. The Paper 
Exit/ADU Paper Jam Sensor detects paper. If paper does not arrive at the sensor within a predetermined 
period of time, “Jam at A” is displayed, and if paper remains at the sensor beyond a predetermined period, 
“Jam at B” is displayed on the computer screen. Paper is ejected face down and stored in the Output Tray.

B. Duplex Mode

After fusing, paper is fed to the Output Tray by the Upper Exit Roller and Upper Exit Pinch Roller. The Paper 
Exit/ADU Paper Jam Sensor detects paper. If paper does not arrive at the sensor within a predetermined 
period of time, “Jam at A” is displayed on the computer screen. At the specified time after the sensor 
detects the bottom of paper, the Upper Exit Roller rotates in reverse direction, turning on the Exit Solenoid 
to move the Ratchet Lever to Duplex Position. As a result, the paper is fed to the development area through 
the Auto Duplex Unit (ADU). If paper remains at the sensor beyond a predetermined period, “Jam at E” is 
displayed. Paper is ejected face down and stored in the Output Tray.

Содержание Panafax UF-7000























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды