Panasonic Panafax UF-490, Руководство по обслуживанию

Страница: 125 / 162

125
Note 1: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 2: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 3: The default setting of parameters depends on the country’s specifications or regulations. Print the
Function Parameter List to confirm the default settings.
092 SMOOTHING 1 = Off
2 = On Selects whether the smoothing function is available.
093
~
129
Not Used
130 BUSY-ACK
TIMING
• In Busy
• After Busy
• While Busy Selects the signal timing between the BUSY and
ACK signal in Printer Interface Mode.
131 CMD RCV GRD
TIMER
1 min.
~
15 min. Selects the Guard Timer between each GDI
Command in Printer Interface Mode.
132 PRT DATA
TIMER
1 min.
~
15 min. Selects the Guard Timer between each GDI Data
Frame in Printer Interface Mode.
133 COLLATION
(PRT)
1 = Off
2 = On
3 = Auto Selects the Print Collation in Printer Interface Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
134 COLLATION
(PC I/F)
1 = Off
2 = On
3 = Auto Selects the Print Collation in PC Interface Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
135
~
199
Not Used
Signal
Setting
1:128 2:256 3:512 4:1024 5:2048 6:Off
MCF/PIP 0-31 0-63 0-127 0-255 0-511 Always
RTP/PIP 32-63 64-127 128-255 256-511 512-1023 -
RTN/PIN 64-127 128-255 256-511 512-1023 1024-2047 -
Signal
Setting
1:5% 2:10% 3:15% 4:20%
MCF/PIP 0-2 0-4 0-7 0-9
RTP/PIP 3-4 5-9 8-14 10-19
RTN/PIN 5- 10- 15- 20-
Function Parameter Table
No. Parameter Selections Function