Before Use
-21-
≥
More vertical bars indicates stronger brightness
or color saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD]
(26)
Button.
When you press [POWER LCD] Button, the LCD
monitor becomes about twice as bright as usual.
≥
The [POWER LCD] Lamp
(26)
lights up.
≥
When turning the power on while using AC
Adaptor, [POWER LCD] function is
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
To Change the Picture Quality of the LCD
Monitor (PV-GS200 only)
Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
≥
When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You can not change
this setting. (PV-GS200 only)
≥
These adjustments do not affect the recorded
images.
≥
For other notes concerning this item, see
-81-
.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Camcorder displays various function
setups on Menus.
≥
When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180
o
.
1
Press the [MENU] Button
(14)
.
POWER
LCD
(26)
STILL
ENTER
FADE
MENU
i
s
(14)
≥
The Menu corresponding to the Mode
selected by using the Mode Dial
(39)
is
displayed.
2
Press the [
;
/
∫
] Button to select a desired
Sub-Menu.
≥
Press the [
;
/
∫
] Button to display the
highlighted item.
3
Press the [
5
] Button to display the
selected Sub-Menu.
4
Press the [
;
/
∫
] Button to select the item.
5
Press the [
5
] Button to display the
selected item.
6
Press the [
;
/
∫
] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
≥
While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [
π
,
∑
,
∏
,
∫
] Buttons and [ENTER]
Button on the Remote Controller. (
-14-
)
To Return to the Previous Screen
Press the [
6
] Button.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Camcorder is turned off. (The
setups of [EFFECT2] (
-39-
) are not retained.)
However, if the Battery or AC Adaptor is
disconnected before turning off the Camcorder,
the selected setup may not be retained.
≥
Menu operation flow is shown in this text by >>.
ª
File Selection in the Picture/MPEG4
Playback Mode (MPEG4 Playback
Mode on PV-GS200 Model only)
A File Selection Operation may be necessary
during Menu Operations. In this case, carry out
the following procedure.
1
Press the [
;
/
∫
/
6
/
5
] Button and select
a file.
≥
The selected file is marked by a frame.
PC
SD
(39)
PICTURE
No.25 100-0012
PV-GS120_200Eng.book 21 ページ ２００４年２月１６日 月曜日 午後１時３２分
