Before Use
-20-
:Tape Playback Mode
Use this mode when playing back the recorded
scene on a tape.
:Card Recording Mode
Use this mode when recording a still picture or a
moving picture on a card. (moving picture on
PV-GS200 Model only)
:Picture Playback Mode
Use this mode when playing back the recorded
still picture on a card.
:MPEG4 Playback Mode (PV-GS200 only)
Use this mode when playing back the recorded
moving picture on a card.
:PC Mode
Use this mode when you want to connect the
Camcorder to your Personal Computer.
Using the Viewfinder/LCD Monitor
ª
Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
1
Tilt up the Viewfinder.
≥
The Viewfinder can also be pulled out for use.
≥
Do not pull on the Eyecup to extend the
Viewfinder.
2
Adjust by sliding the Eyepiece Corrector
Knob
(48)
.
To Use the Viewfinder at the Same Time as the
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥
The Viewfinder does not turn off even if the LCD
Monitor is opened.
≥
When you turn the Camcorder off, this setting is
cancelled.
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1
Press the [PUSH OPEN] Button
(2)
and pull
the LCD Monitor
(3)
out in the direction of
the arrow.
≥
The Viewfinder is now deactivated.
PC
12:30:45PM
OCT 15 2004
12:30:45PM
OCT 15 2004
12:30:45PM
OCT 15 2004
12:30:45PM
OCT 15 2004
(48)
≥
The LCD Monitor can be opened a maximum
of 120
o
. If you open the LCD monitor to an
angle of 120
o
, it becomes easier to operate
menus or to play back pictures.
2
Adjust the LCD Monitor angle according to
the desired recording angle.
≥
The LCD Monitor can rotate a maximum of
180
o
1
from the vertical position upwards
and a maximum of 90
o
2
to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the
Camcorder. You cannot rotate the LCD
Monitor when it is opened to an angle of 120
o
.
Therefore, do not rotate it forcibly.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥
Make sure the Card Slot Cover is closed.
ª
Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [
;
/
∫
] Button and select the item to be
adjusted, and then press the [
6
/
5
] Button to
raise or lower the number of vertical bars in the
Bar Indication.
PUSH
OPEN
(2)
(3)
2
90
o
1
180
o
1
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
;
/
∫
:SELECT
&
/
%
:SETUP
!
/MENU:EXIT
LCD/EVF SETUP
PV-GS120_200Eng_text.fm 20 ページ ２００４年２月１７日 火曜日 午後３時９分
