9
How to install the 5-inch bay units
Follow the steps below to install the 5-inch bay units.
5-inch bay units and HDDs sold separately.
1
Remove the screws (x2) of the top panel, and
remove the top panel.
2
Remove the screws (x2) at the left and right
and also the screws (x2) at the top of the front
panel, and remove the panel. (Total: 4 screws)
Exercise caution when removing the front panel
since the screw at the top left in the figure above
will catch on the transparent panel.
3
Remove the screws (x2 each) securing the
5-inch bay unit cover to the front panel, and
then remove the cover.
4
Loosen the left and right anchoring screws of
the 5-inch bay unit brackets, and then remove
the brackets from the main unit.
(x1 screw each at left and right for each 5-
inch bay unit)
(Continued on next page)
