Panasonic P-05D, Инструкция по эксплуатации

Страница: 145 / 301

Terminal Password
This is a four-to-eight digit number required for mobile
phone resetting or when the password manager is launched
by other applications (
Z
P.149).
Network Security Code
This is a four-digit number required for your identification
when you place an order at a docomo Shop or docomo
Information Center, or when you use network services. This
number is determined at the time of contract and you can
also change the number later by yourself.
If you have "docomo ID/password" for the general support
site for PC users "My docomo"
*1
, you can set a new network
security code from a PC.
*1 For details on "My docomo" (
Z
P.293).
PIN1 Code/PIN2 Code
Two security codes are provided for the docomo mini UIM
card, namely the PIN1 code and PIN2 code. These security
codes are set to "0000" by default, but you can change the
numbers later (
Z
P.145).
The PIN1 code is a four-to-eight digit number (code) for
checking the user each time the docomo mini UIM card
is installed or each time mobile phone is turned on, to
prevent the unauthorized use by a third party.
You can make/receive calls and operate the mobile phone by
entering the PIN1 code.
• If you use a docomo mini UIM card that you used for another
mobile phone in this mobile phone, enter the PIN1/PIN2 codes
you set for the old terminal. The codes are "0000" if you have
not changed them.
• If you fail to enter PIN1/PIN2 code correctly three times in
succession, PIN1/PIN2 code is locked and disabled. In this
case, unlock the PIN1/PIN2 lock with "PIN unblocking key".
144 Various Settings