Panasonic Omnivision PV-4651, Руководство по обслуживанию

Страница: 202 / 205

Selecting the Audio Mode for Recording
Select the type of broadcast and sound track you wish to record.
With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast (main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or Second Audio Program (second language)
on the Hi-Fi tracks for better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
1
SAP/Hi-Fi
STEREO
SAP
MONO
Push SAP/Hi-Fi repeatedly
(each press within 5
seconds) to select the
desired audio mode
(STEREO/SAP/MONO).
• Please refer to “Receivable
Broadcast Types” section.
• The currently selected
audio mode is indicated
with an arrow.
2
Do a recording.
See the “Record On a Tape” section.
Selecting the Audio Mode for Playback
Select the type of sound track you desire for playback.
SAP/Hi-Fi
H I F I
NORMAL
Push SAP/Hi-Fi repeatedly
(each press within 5
seconds) to select the
desired audio mode
(HIFI/NORMAL).
• Please select HIFI to listen to
your stereo recordings with
stereo sound or MONO for
monaural sound.
• The currently selected
audio mode is indicated
with an arrow.
Playback the tape.
See the “Playback a Tape” section.
To Select Audio Mode From Menu
Push MENU to display the menu.
Rotate and push the Wheel to select SET UP
VCR from menu.
Rotate the Wheel to select SET AUDIO MODE.
Push the Wheel to set the desired audio for
listening or recording.
1
SET UP VCR
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
REPEAT PL AY : ON
BEEPER : ON
I NPUT SELECT : TUNER
SET AUD I O MODE
• For recording, set to “STEREO”, “SAP”, or “MONO”.
• For playback, set PLAY AUDIO to “Hi-Fi”, or “MONO”.
4
Push MENU three times to exit this mode.
5
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
AUD I O MODE : STEREO
PLAY AUD I O : H I F I
SET AUD I O MODE
STOP
ZERO/1MIN SLOW PAUSE
REC/TIME
PLAY
PROG
CLEAR
MENU
DISPLAY
1 2 3
5 4 6
7 9 8
0 100
PUSH TO
SET
ROTATE TO SELECT
SPEED VCR/TV
COUNTER
RESET
POWER
REW/
FF/
ADD/DLT
R-TUNE
SAP/Hi-Fi
VCR
CH
TRACKING
•
1
1
5
•
3
2
4
•
•
3
2
• When purchasing or
renting prerecorded tapes,
remember that only those
recorded in Hi-Fi stereo will
play back with true stereo
sound. Standard stereo
tapes will play back with
monaural sound.
• In order to listen to Hi-Fi stereo playback,
the VCR AUDIO (L/R) jacks must be
connected to a stereo TV or stereo amp
and speakers. (See previous page.)
• When adjusting the tracking during
playback, the Hi-Fi audio sound may revert
to normal audio sound. This is normal.
• There may be a difference in audio level
between Hi-Fi and normal audio playback.
NOTES
a
b
a