Panasonic Omnivision PV-4651, Руководство по обслуживанию, Страница: 200 / 205

Warning Beeper Feature
When you select BEEPER ON as described below, a short warning will sound
each time an invalid entry or operation is made and a timer program is set.
When activated, this feature prohibits all operations except for timer
recording, and tape eject. This is useful to prevent misoperation and
protect your VCR from curious children.
VCR Lock Feature
Hold down STOP/EJECT on
the VCR for 7 seconds again
during Stop, or Power OFF
mode.
STOP/EJECT
STOP/EJECT
Hold down STOP/EJECT on
the VCR for 7 seconds
during Stop, or Power OFF
mode.
VCR LOCK ACT I VATED
VCR LOCK OFF
• VCR Lock mode is cancelled automatically
after 24 hours when the clock is set.
4
Push MENU twice to exit
this screen.
Push MENU to display
the menu.
Rotate and push the
WHEEL to select “SET
UP VCR”.
MENU
MENU
1
MENU
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
SET UP VCR
SET C LOCK
SET UP CHANNEL
I D I OMA / LANGUE : ENGL I SH
1
Check list before you begin.
All connections are made.
VCR is Plugged in.
TV is turned on and set to the VCR
channel (CH3 or CH4).
•
STOP
ZERO/1MIN SLOW PAUSE
REC/TIME
PLAY
PROG
CLEAR
MENU
DISPLAY
1 2 3
5 4 6
7 9 8
0 100
PUSH TO
SET
ROTATE TO SELECT
SPEED VCR/TV
COUNTER
RESET
POWER
REW/ FF/
ADD/DLT
R-TUNE
SAP/Hi-Fi
VCR
CH
TRACKING
•
1
4
STOP/EJECT
SET UP VCR
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
REPEAT PL AY : ON
BEEPER : ON
I NPUT SELECT : TUNER
SET AUD I O MODE
2
3
3
2
Special VCR Features
To Cancel the VCR Lock feature,
Rotate the WHEEL to
select “BEEPER”, then
push to select “ON” or
“OFF”.