Panasonic Omnivision PV-4651, Руководство по обслуживанию

Страница: 197 / 205

Timer Recording
STOP
ZERO/1MIN SLOW PAUSE
REC/TIME
PLAY
PROG
CLEAR
MENU
DISPLAY
1 2 3
5 4 6
7 9 8
0 100
PUSH TO
SET
ROTATE TO SELECT
SPEED VCR/TV
COUNTER
RESET
POWER
REW/ FF/
ADD/DLT
R-TUNE
SAP/Hi-Fi
VCR
CH
TRACKING
Check list before you begin.
All connections are made.
TV and VCR are plugged in and turned on.
VCR/TV selector is set to “VCR.”
Clock is set to correct time.
Record tab in place.
2
1
Push PROG to display
the program screen.
PROG • If a program is already in
memory, use the Wheel to
select an unused program
number.
Rotate and push the
WHEEL to select and
set the DATE.
WEEKLY
(MON)
DAILY
WEEKLY(SUN)
7
2
1
31
6
8 9
Wheel Selection Order
WEEKLY(SAT)
Example
Today’s Date
4
PROG
Push PROG to end
the program.
• If you want to enter more
programs, select a blank
program number with Wheel
and repeat steps 2 and 3.
5
Push PROG to exit
this mode.
Push POWER off
to set the timer.
6
VCR
POWER
PROG
NOTES
• If the cassette record tab is missing at the time the POWER is turned OFF, the tape ejects and
the TIMER indicator flashes.
• If the start times of two programs overlap, the lower numbered program will have priority.
• If the start time for a timer recording comes up during a normal recording or One Touch Recording (page 14),
the timer recording will not be performed.
• If there is a power interruption of more than one minute, the recording will not be performed or continue.
• If “PROGRAM IS INCOMPLETE” appears on-screen in step 4, check all entries and make necessary corrections .
Your VCR can be set up to do a recording
while you are away or otherwise occupied.
Up to 8 programs can be placed in
memory. You can choose to record one
time, daily, or weekly.
: PUSH WHEEL
TO END PUSH PROG KEY
BY ROTAT I NG WHEEL
SELE CT START DATE
7 FRI --:-- --:-- --
TODAY
DATE START STOP CH
SLP
1 DAY 9 : 00 A 12 : 00 A 08 SP
SELECT 1-8 : ROTATE WHEEL
ENTER : PUSH WHEEL
END : PUSH PROG KEY
P DT STRAT STOP CH SPD
2 -- -- : -- -- : -- -- --
3 -- -- : -- -- : -- -- --
4 -- -- : -- -- : -- -- --
CANCEL : PUSH CLEAR KEY
• When recording programs via
a cable box, make sure the
cable box is left ON and
tuned to the desired channel.
3
Rotate and push the
WHEEL to select and
set remaining items
at right.
Remaining Items
to be set:
• START time
• STOP time
• CH(annel) number,
or LINE for outside
source recording.
• Speed (SP, LP, SLP).
To Make Corrections
Repeatedly push the Wheel to move forward, or the CLEAR button to
move back to the desired item. Then, select and set continue with step 3.
: PUSH WHEEL
TO END PUSH PROG KEY
BY ROTAT I NG WHEEL
SELE CT START DATE
DAILY --:-- --:-- --
MON-FRI
DATE START STOP CH
SLP
: PUSH WHEEL
TO END PUSH PROG KEY
BY ROTAT I NG WHEEL
SELE CT START DATE
WEEKLY --:-- --:-- --
SUN
DATE START STOP CH
SLP
Daily and Weekly Timer Recording
If you want the program to be recorded daily
(Mon thru Fri) , enter DAILY in place of the
DATE in step 2. If you want the recording to
be on a weekly basis, enter WEEKLY MON,
TUE, etc..
•
CLEAR
•
•
1
4
5
2
3
6
6
TIMER
Multi Function Display
Multi Function Display