Before Use
-13-
Short-Cut Menus of the Card Playback Mode
If you use the Short-Cut Menu, the Card Playback Mode
Menu can be called up quickly. Press the [PUSH] Dial to
display the Short-Cut Menu, and turn the [PUSH] Dial to
select the desired Menu.
[FILE SEARCH]
The [FILE SEARCH] Menu for finding files by number
appears. (
-33-
)
[ERASE FILE]
The [ERASE FILE] Menu for erasing the file being displayed
appears. (
-36-
) Use this Menu after the file to be erased
appears.
[FILE LOCK]
The [FILE LOCK] Menu for avoiding accidental erasure of
files (Lock Setting) being displayed appears. (
-35-
) Use this
Menu after the file to be locked appears.
[DPOF SETTING]
The [DPOF SETTING] Menu for setting DPOF to the file
displayed appears. (
-36-
) Use this Menu after the file for
DPOF Setting appears.
[EXIT]
It is for terminating the Short-Cut Menu.
Setting Date and Time
Since the internal clock of the Movie Camera has a slight
imprecision, make sure to check the time before recording.
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].
2
Press the [PUSH] Dial
(26)
to select
[YEAR]/[MONTH]/[DAY]/[HOUR]/[MIN.] and turn to set
it to a desired value.
≥
Year will cycle in the order shown below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
(51)
to finish setting the date
and time.
≥
The clock operation starts from [00] second.
≥
The Menu will disappear when the [MENU] Button is
pressed again.
≥
If the built-in battery is weak, the [
0
] Indication flashes. In
this case, charge the built-in battery.
≥
The clock employs the 24-hour system.
FILE SEARCH
ERASE FILE
FILE LOCK
DPOF SETTING
EXIT
(26)
(51)
M E N U
PUSH
SHUTTER/IRIS/
VOL/JOG
CLOCK SET
PRESS MENU TO RETURN
YEAR
2002
MONTH 10
DAY
0
8
HOUR 14
MIN. 30
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the
clock. When the [
0
] Indication flashes, the internal lithium
battery is near exhaustion.
1
Connect the AC Adaptor to the Movie Camera with the
power turned off and then connect to the AC Mains
socket.
≥
After charging for 4 hours, the built-in lithium battery can
power the clock for approximately 3 months.
LP Mode
A desired recording speed can be selected with
[REC SPEED] on the [RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time becomes
1.5 times longer than that of SP Mode.
Although the image quality does not decrease with the LP
Mode recording, mosaic-pattern noise may appear on a
playback image, or some normal functions may be restricted.
≥
The contents that are recorded in LP Mode are not
completely compatible with other equipment.
≥
Audio dubbing is not possible with LP Mode. (
-27-
)
Audio Recording Mode
The sound quality of the recorded sound can be selected
with [AUDIO REC] on the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible with “16 bit 48 kHz
2 track” Mode. With the “12 bit 32 kHz 4 track” Mode, the
original sound can be recorded on 2 tracks in stereo, while
the other 2 tracks can be used for Audio Dubbing.
WARNING
THE LITHIUM BATTERY IN THIS EQUIPMENT MUST
ONLY BE REPLACED BY QUALIFIED PERSONNEL.
WHEN NECESSARY, CONTACT YOUR LOCAL
PANASONIC SUPPLIER.
B5-B.book 13 ページ ２００２年８月３０日 金曜日 午前１０時４０分
