Others
-72-
≥
Unless the Time Code is continuously
recorded from the beginning of a tape,
accurate editing may not be possible. To
ensure that the Time Code will be recorded
with no breaks, we recommend the use of the
Camera Search Function (
-48-
) or the Blank
Search Function (
-58-
) before recording a new
scene.
ª
Memory Stop Function
The Memory Stop Function is useful for the
following operations.
Rewinding or fast-forwarding a tape to a
desired position
1
Set [DISPLAY SETUP] >> [C.DISPLAY] >>
[MEMORY].
2
Reset the Tape Counter to zero at the tape
position from which you want to play it
back later. (
-40-
,
-46-
)
3
Start playback or recording.
4
After playback or recording has finished:
Press the [MODE] Button and set the
Movie Camera to VCR Mode.
≥
The [VCR] Lamp lights up.
5
Rewind the tape.
≥
The tape automatically stops approximately
at the position where the counter was set to
zero.
Stopping editing automatically during audio
dubbing
1
Set [DISPLAY SETUP] >> [C.DISPLAY] >>
[MEMORY].
2
Reset the Tape Counter to zero at the
position where you want to stop editing.
3
Play back the still picture where you want
to start audio dubbing.
4
Start audio dubbing. (
-60-
)
≥
Audio dubbing automatically stops at the
position where the counter was set to zero.
