VCR Mode
-61-
4
Press the [A.DUB] Button
(64)
on the
Remote Controller.
5
To start Audio Dubbing, press the [
;
]
Button
(76)
on the Remote Controller.
To Cancel Audio Dubbing
Press the [
;
] Button
(76)
on the Remote
Controller.
The Movie Camera is in the Still Playback Mode
again.
To dub audio while listening to a
pre-recorded sound
When pausing the audio dubbing, [12bit AUDIO]
on the [PLAYBACK FUNCTIONS] Sub-Menu is
automatically set to [ST2] and you can check
the pre-recorded sound. When a microphone is
used for audio dubbing, use headphones to
listen to the pre-recorded sound while dubbing
the audio. (When using headphones, set [AV
JACK] on the [AV IN/OUT SETUP] Sub-Menu to
[OUT].) When the line input is used, you can
dub audio while listening to a pre-recorded
sound from the speaker.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >> [12bit AUDIO] >>
[ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by
Audio Dubbing.
MIX: It plays back both the original sound and
the sound added by Audio Dubbing
simultaneously.
≥
For other notes concerning this item, see
-66-
.
ª
To Adjust the Audio Level
You can adjust the Audio Level for Audio
Dubbing.
1
Set [VCR FUNCTIONS] >>
[RECORDING SETUP] >> [AUDIO LEVEL]
>> [YES].
≥
The [AUDIO LEVEL SETUP] Menu
appears.
2
Press the [PUSH] Dial
(14)
to select the
[MNL (AGC, NO-AGC)].
≥
The Audio Level Meter appears.
INDEX
INDEX
SELECT
STOP
K
L
∫
V
/REW
STILL ADV
T
W
s
VO
L
r
¥
REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
6
1
5
;
E
D
(64)
(76)
MENU
W.B/SHUTTER/IRIS
PUSH
VOL/JOG
(14)
(18)
AUDIO LEVEL SETUP
PRESS MENU TO RETURN
MODE AUTO MNL
MNL
(AGC)
(NO-AGC)
(
) -30 0 +6
GAIN |||||||||||---
(
) -30 0 +6
LEVEL |||
(MIC)
3
Turn the [PUSH] Dial
(14)
to increase or
decrease the bars of the [GAIN] Indication.
≥
For details, refer to the [MIC LEVEL ADJ.] on
the [RECORDING SETUP] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu (
-56-
).
Copying on an S-VHS (or a VHS)
Cassette
(Dubbing)
After connecting the Movie Camera and the
VCR as illustrated, start the following
procedures.
1
AV Cable
2
S-Video Cable
≥
Be sure to press the [OSD] Button (
-40-
) on the
Remote Controller prior to copying so that no
indications are visible. Otherwise, the
displayed tape counter and function
indications are also copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an
erasure prevention tab.
≥
If various setups (such as external input,
tape speed, etc.) are required, please refer
to the operating instructions of your VCR.
Movie Camera:
3
Press the [
1
] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop
recording.
Movie Camera:
6
Press the [
∫
] Button to stop playback.
W.B/SHUTTER/IRIS
PUSH
VOL/JOG
(14)
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
1
2
VIDEO
IN/OUT
AUDIO
L–
–R
IN/OUT
S-VIDEO
IN/OUT
