Camera Mode
-82-
ª
To View the Recorded Scene
while the Recording Is Paused
(Camera Search)
The recorded scene can be viewed by
keep pressing the [SEARCH
j
] Button
(7)
or [SEARCH
i
] Button
(9)
in the
Recording Pause Mode.
≥
When the [SEARCH
j
] Button is
pressed, images are played back in the
reverse direction.
≥
When the [SEARCH
i
] Button is
pressed, images are played back in the
forward direction.
ª
To Finish the Recording
Set the [OFF/ON/MODE] Switch
(43)
to
[OFF].
≥
For other notes concerning this item,
see
-120-
.
ª
To Add a Sound while
Recording
With the supplied Free Style Remote
Controller with Mic connected to the
[REMOTE] Socket
(24)
, you can add a
narration while recording is in progress.
While the [TALK] Button
(84)
is pressed,
the [
] Indication is displayed and the
sound is recorded from [MIC]
(80)
.
≥
While the [TALK] Button is pressed, the
built-in microphone does not operate.
ª
Recording Yourself
By opening the LCD Monitor and rotating
it frontward (to the lens side), you can let
the subject in front of the Movie Camera
SEARCH
SEARCH
BACK
LIGHT
(7)
(9)
REC
(80)
(84)
monitor the shot while recording is in
progress.
≥
When the LCD Monitor is opened, the
Viewfinder is disabled automatically.
However, when the LCD Monitor is
rotated frontward, the image is also
shown in the Viewfinder.
≥
If you prefer to have the image on the
LCD Monitor to look like an image in a
mirror, set [SELF REC] on the
[OTHER FUNCTIONS1] Sub-Menu to
[MIRROR]. Images are recorded
normally and no left and right reversal
occurs.
≥
If [MIRROR] is used during
self-recording, only the basic
indications, such as the Recording
Indication [
] (Red) or [
¥
], Recording
Pause Indication [
] (Cyan) or [
¥;
]
and Remaining Battery Power
Indication [
x
], are displayed.
≥
If a general Warning/Alarm Indication
[
°
] appears, return the LCD Monitor
to the original position in order to check
the specific content of the
Warning/Alarm Indication.
Quick Start
By pressing the [QUICK START] Button
(41)
, and the Movie Camera will be ready
for recording in approximately
1.3 seconds after the Movie Camera is
turned on.
1
Press the [QUICK START] Button
(41)
.
≥
The Quick Start Recording Lamp
(42)
lights up.
START
QUICK
(41)
(42)
VQT0C47.book 82 ページ ２００３年１月２０日 月曜日 午後４時４９分
