Before Use
-80-
Setting Date and Time
Since the internal clock of the Movie
Camera has a slight imprecision, make
sure to check the time before recording.
1
Set [CAMERA FUNCTIONS] >>
[OTHER FUNCTIONS1] >>
[CLOCK SET] >> [YES].
Or set [VCR FUNCTIONS] or
[CARD FUNCTIONS] >>
[OTHER FUNCTIONS] >>
[CLOCK SET] >> [YES].
2
Press the [PUSH] Dial
(38)
to select
[YEAR], [MONTH], [DAY], [HOUR] or
[MIN.] and turn to set it to a desired
value.
≥
Year will cycle in the order shown
below.
2000, 2001, ..., 2089, 2000, ...
3
Press the [MENU] Button
(46)
to
finish setting the date and time.
≥
The clock operation starts from
[00] second.
≥
The Menu will disappear when the
[MENU] Button is pressed again.
≥
If the built-in battery is weak, the [
0
]
Indication flashes. In this case, charge
the built-in battery.
≥
The clock employs the 24-hour system.
Internal Lithium Battery
Recharge
The internal lithium battery sustains the
operation of the clock. When the [
0
]
Indication flashes, the internal lithium
battery is near exhaustion.
M E N U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(46)
(38)
CLOCK SET
PRESS MENU TO RETURN
YEAR
2003
MONTH 10
DAY
0
8
HOUR 14
MIN. 30
1
Connect the AC Adaptor to the
Movie Camera with the power
turned off and then connect to the
AC Mains socket.
≥
After charging for 4 hours, the
built-in lithium battery can power the
clock for approximately 3 months.
LP Mode
A desired recording speed can be
selected with [REC SPEED] on the
[RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording
time becomes 1.5 times longer than
that of SP Mode.
Although the image quality does not
decrease with the LP Mode recording,
mosaic-pattern noise may appear on a
playback image, or some normal
functions may be restricted.
≥
The contents that are recorded in LP
Mode are not completely compatible
with other equipment.
≥
Audio dubbing is not possible with LP
Mode. (
-100-
)
Audio Recording Mode
The sound quality of the recorded sound
can be selected with [AUDIO REC] on
the [RECORDING SETUP] Sub-Menu.
High sound-quality recording is possible
with “16 bit 48 kHz 2 track” Mode. With
the “12 bit 32 kHz 4 track” Mode, the
original sound can be recorded on
2 tracks in stereo, while the other
2 tracks can be used for Audio Dubbing.
VQT0C47.book 80 ページ ２００３年１月２０日 月曜日 午後４時４９分
