Others
-132-
≥
Once every half year, wind the tape to
the end and then rewind it to the
beginning. If the Cassette is left for
1 year or longer without winding or
rewinding, temperature and humidity
changes may cause the Cassette to
deform due to swelling, shrinking, and
so forth. The wound tape may stick to
itself.
≥
Do not place a Cassette near highly
magnetic substances or equipment.
≥
The surface of tape is covered with
extremely minute magnetic particles,
upon which signals are recorded.
Magnetic necklaces, toys, etc., have
magnetic force that is stronger than
you may normally expect, and they
may erase the contents of a recording
or may cause noise in images and
sounds.
Card
≥
When the Card is being read, do not
remove the Card, turn off the power, or
subject it to vibration or impact.
≥
Do not leave the Card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated.
≥
Do not bend or drop the Card. The
Card or the recorded content may be
damaged.
≥
After use, be sure to remove the Card
from the Movie Camera.
≥
After usage, store the supplied SD
Memory Card in the enclosed bag.
≥
Do not touch the terminals on the back
of the Card with your fingers. Do not
allow dirt, dust or water to enter it.
ª
LCD Monitor/Viewfinder/Lens
Hood
LCD Monitor
≥
In a place with drastic temperature
changes, condensation may form on
the LCD Monitor. Wipe it with soft dry
cloth.
≥
If your Movie Camera is extremely cold
when you turn its power on, the image
on the LCD Monitor is slightly darker
than usual at first. However, as the
internal temperature increases, it goes
back to the normal brightness.
Viewfinder
≥
Do not direct the Viewfinder or Lens to
the sun. Internal components may be
seriously damaged.
≥
When the Movie Camera is used with a
large capacity Battery (CGA-DU21;
optional) attached to it, it is not practical
to look in the Viewfinder from behind
the Battery.
Lens Hood
≥
Do not attach other conversion lenses
in front of the Lens Hood; there is no
mount to be used for the attachment.
≥
When you wish to attach the Tele
Conversion Lens (VW-LT2714N2E;
optional), Wide Conversion Lens
(VW-LW2707N2E; optional), MC
Protector (VW-LMC27E; optional), or
ND Filter (VW-LND27E; optional), first
of all, turn the Lens Hood
counterclockwise. If the MC Protector
or ND Filter is used, the Lens Hood can
be mounted on the filter.
≥
If you push the [W/T] Lever toward [W]
during recording with the filter and
conversion lens attached together to
the Movie Camera, 4 corners of the
image may become dark (vignetting).
For details, please refer to the
operating instructions of your
accessories.
Extremely high precision technology
is employed to produce the LCD
Monitor screen featuring a total of
approximately 113,000 pixels. The
result is more than 99.99% effective
pixels with a mere 0.01% of the pixels
inactive or always lit. However, this is
not a malfunction and does not affect
the recorded picture.
Extremely high precision technology
is employed to produce the
Viewfinder screen featuring a total of
approximately 113,000 pixels. The
result is more than 99.99% effective
pixels with a mere 0.01% of the pixels
inactive or always lit. However, this is
not a malfunction and does not affect
the recorded picture.
VQT0C47.book 132 ページ 2003年1月20日 月曜日 午後4時49分