Camera Mode
-81-
Camera Mode
Recording
When recording with the
[AUTO/MANUAL/FOCUS] Switch
(47)
set to [AUTO], the Movie Camera
automatically adjust the focus and white
balance. In some cases, they cannot be
adjusted automatically and need to be
adjusted manually. (
-88-
,
-90-
)
≥
Before turning on the power, remove
the Lens Cap. If the Lens Cap is still
attached when the power is turned
on, Automatic White Balance
Adjustment (
-88-
) may not function
correctly.
1
Set the [OFF/ON/MODE] Switch
(43)
to [ON].
≥
The [CAMERA] Lamp
(45)
lights up.
2
Set the [TAPE/CARD/CARD MODE]
Selector
(27)
to [TAPE].
3
Press the Recording Start/Stop
Button
(44)
.
≥
Recording starts.
≥
After the [RECORD] is displayed, it
changes to [REC].
AUTO
MANUAL
FOCUS
(47)
CAMERA
VCR
CARD
PB
OF
F ON MODE
(43)
(45)
TAPE
CARD
CARD
MODE
(27)
(44)
RECORD
REC
ª
Recording Lamp (Tally Lamp)
The Recording Lamp
(16)
lights up
during recording and alerts those being
recorded that recording is in progress.
≥
The Recording Lamp does not light up
if the [REC LAMP] on the
[OTHER FUNCTIONS1] Sub-Menu is
set to [OFF].
ª
To Pause the Recording
Press the Recording Start/Stop
Button
(44)
again.
The [PAUSE] Indication is displayed.
≥
If the Recording Pause Mode continues
for more than 6 minutes, the power is
turned off automatically for tape
protection and power conservation. To
resume recording from this condition,
turn off, then turn on the power again.
ª
To Check the Recording
By pressing the [
S
] Button
(7)
briefly in
the Recording Pause Mode, you can
play back the last few seconds of the
recorded scene.
≥
The [CHK] Indication is displayed. After
checking, the Movie Camera resumes
the Recording Pause Mode.
(16)
PAUSE
PAUSE
SEARCH
(7)
VQT0C47.book 81 ページ ２００３年１月２０日 月曜日 午後４時４９分
