Before Use
-72-
Power Supply
ª
Using the AC Adaptor
1
Connect the DC Input Lead to the
Movie Camera.
2
Connect the DC Input Lead to the
AC Adaptor.
3
Connect the AC Mains Lead to the
AC Adaptor and the AC mains
socket.
≥
The AC Mains Lead’s outlet plug
does not fit entirely into the AC
Adaptor socket. A gap will remain as
shown
1
.
≥
Before connecting or disconnecting
the power supply, set the
[OFF/ON/MODE] Switch on the
Movie Camera to [OFF] and make
sure that [CAMERA/VCR/CARD PB]
Lamps are not lit.
ª
Using the Battery
Before use, fully charge the Battery.
1
Attach the Battery to the AC
Adaptor and charge it.
≥
Since the Battery will not be charged
when the DC Input Lead is
connected to the AC Adaptor,
disconnect it from the AC Adaptor.
≥
The [POWER] Lamp and [CHARGE]
Lamp lights up, and charging starts.
≥
When the [CHARGE] Lamp goes off,
charging is completed.
1
2
Attach the charged Battery to the
Movie Camera.
Disconnecting the Power Source
Set the [OFF/ON/MODE] Switch
(43)
to
[OFF] and, while pressing the
[PUSH BATT] Button
(50)
, slide the
Battery or DC Input Lead upward to
disconnect it.
≥
For other notes concerning this item,
see
-120-
.
Charging Time and Available
Recording Time
A
Charging Time
B
Maximum Continuous Recording
Time
C
Intermittent Recording Time
(Intermittent Recording Time is the
available recording time with repeated
recording and stopping actions.)
“1h10min.” indicates 1 hour and 10
minutes.
≥
Battery CGA-DU07 is supplied.
≥
The times shown in the table are
approximate times. The numbers in
parentheses indicate the recording
time when the LCD Monitor is used. In
actual use, the available recording time
may be shorter.
CGA-DU07
A
1h30min.
B
2h15min.(1h35min.)
C
1h10min.(50min.)
CGA-DU14
A
2h45min.
B
4h30min.(3h10min.)
C
2h15min.(1h35min.)
CGA-DU21
A
3h55min.
B
6h45min.(4h45min.)
C
3h25min.(2h25min.)
PUSH
BATT
OF
F
ON M
ODE
(50)
(43)
VQT0C47.book 72 ページ ２００３年１月２０日 月曜日 午後４時４９分
