- Eng-8 -
English
Feature Diagram
(continued)
Notes:
1. The above illustration is for reference only.
2. Protective films cover the surface of the door handle and control panel. You can remove them before
using.
Water Tank
1. Full water level is 800 ml. Add water to 800 ml mark.
2. Fill with pure water (do not use mineral water).
3. Fully fill the water tank, and cover with the rubber lid.
Drip tray
1. The drip tray must be fitted as it
collects excess water during cooking.
2. The drip tray should be removed and
cleaned on a regular basis.
Water Tank Lid
Rubber Lid
Figure 1
Drip Tray
Control Panel
Integrated Water Tank
1. Water tank and drip tray are parts of integrated water tank.
2. Take integrated water tank out from package before using
according to figure 1. Then install it to the lower side.
3. To remove the drip tray, hold with both hands and
gently ease forward.
4. Always clean the integrated water tank.
5. Ensure the water tank is closed tightly and securely
positioned, otherwise leakage may occur.
6. DO NOT USE A DISHWASHER TO CLEAN THE
INTEGRATED WATER TANK.
Note: When removing the integrated water tank,
several drops may flow from the water outlet of
bottom cavity. You can remove the integrated
water tank after the oven cavity has cooled
down.
F0003CF00CP_09_EN_20210218.indd 8
2021/2/27 10:33:21