En-2
Installation and Connection
Examine your microwave oven
Unpack the oven, remove all packing material, and
examine the oven for any damage such as dents,
broken door latches or cracks in the door. If you
find any damage, notify your dealer immediately.
Do not install a damaged microwave oven.
Earthing instructions
IMPORTANT: THIS UNIT HAS TO BE PROPERLY
EARTHED FOR PERSONAL SAFETY.
If your AC outlet is not earthed, it is the personal
responsibility of the customer to have it replaced
with a properly earthed wall socket.
Operation voltage
The voltage has to be the same as specified on the
label on the oven. If a higher voltage than specified
is used, it may cause a fire or other damages.
Placement of the Oven
This appliance is intended to be used in household
and similar applications such as:
• staff kitchen areas in shops, offices and other
working environments;
• farm houses;
• by clients in hotels, motels and other residential
environments;
• bed and breakfast type environments.
1.
Place the oven on a flat and stable surface,
more than 85 cm above the floor.
The appliance is freestanding type and shall
not be placed in a cabinet.
2.
When this oven is installed, it should be easy
to isolate the appliance from the electricity
supply by pulling out the plug or operating a
circuit breaker.
3.
For proper operation, ensure a sufficient air
circulation for the oven.
Counter-top use:
a.
Allow 15 cm of space on the top of the
oven, 10 cm at the back, 5 cm on one side,
and the other side must be opened more
than 40 cm.
b.
If one side of the oven is placed flush to
a wall, the other side or top must not be
blocked.
10 cm
Counter-top
15 cm
5 cm
OPEN
4.
Do not place this oven near an electric or gas
cooker range.
5.
The feet should not be removed.
6.
This oven is only for household usage. Do not
use outdoors.
7.
Avoid using the microwave oven in high
humidity.
8.
The power cord should not touch the outside
of the oven. Keep the cord away from hot
surfaces. Do not let the cord hang over the
edge of a table or work top. Do not immerse
the cord, plug or oven in water.
9.
Do not block the air vents on the top and back
of the oven. If these openings are blocked
during operation the oven may overheat. In
this case the oven is protected by a thermal
safety device and resumes operation only after
cooling down.
10.
This appliance is not intended to be operated
by means of an external timer or separate
remote-control system.
NN-GT261WM_ZP.indb 2
2014/06/13 17:57:35
Содержание NN-GT264MZPE
Страница 4: ...NN GT261WM_ZP indb 2 2014 06 13 17 57 35 ...
Страница 105: ...NN GT261WM_ZP indb 29 2014 06 13 17 57 59 ...