48
49
Symptom
Cause
The cooking result of a
certain memory cooking is
different from that of the
previous time
O
Did the preheat temperature or cooking mode that were set into
memory change? (p.25)
Common Queries
Question
Answer
Where can I obtain additional
oven accessories?
O
Contact the manufacturer or the dealer from whom you
purchased the oven.
Can the oven be stacked?
O
Only the same oven can be stacked. Be sure to fix with optional
parts. For details, refer to “Instruction for Stacking”. (p.10)
Can I dry tea towels and
clothes in the oven?
O
No. Never put these, or similar items, in your Panasonic Oven.
How often should the oven be
serviced?
O
When the message referring p.46 is displayed, oven
maintenance is required. Please contact the dealer or a service
agent. (p.3) Continuing to use the oven may cause failure.
Troubleshooting
When to Call a Service Agent
If a “U” or “F” Appears In The Display
Start all over again after checking the contents when the following display appears. Display disappears
when Stop/Reset pad is pressed.
Display
Cause
U16
The SD Memory Card is locked.
O
Insert the SD Memory Card again after
releasing the lock.
O
(p.51)
SCV2N
RABN SU7FA029690
RP-SDFC51 MADE IN JAPAN
Lock is released
when this part is
pushed upwards.
U17
A card other than the specified SD Memory Card is inserted.
O
Take out the SD Memory Card and check. (p.51)
If the “U17” appears even after inserting the specified SD
Memory Card, the SD Memory Card may be damaged.
U19
The SD Memory Card is not inserted.
O
Please insert the specified SD Memory Card. (p.51)
U41
or
U43
Grounding is incomplete.
O
Contact the dealer or a service agent. (p.3)
U88
The touch screen is touched for a while.
O
Has the screen been touched for 25 seconds or more?
O
Is there any dirt stuck on the screen?
F09
The oven is connected to 50 Hz. Connect to 60 Hz.
F
code other than
F09
(
F97
, etc.)
If the “F” code does not disappear even after pressing the Stop/
Reset pad, pull out the plug and then plug it in again after
5 seconds. The oven is faulty if the “F” code still appears.
Unplug the oven or shut off the power at the circuit breaker, and
contact the dealer or a service agent. (p.3)