18
19
Q
Auto Power OFF Function
The initial screen of the display turns off automatically if it is not used for 5 minutes.
Q
To turn the power ON
In Auto Power OFF mode, opening the door turns the power ON.
Lamp
Back Pad
O
Returns to the previous control screen so that settings can be
changed.
O
Unavailable after cooking has started.
Stop/Reset Pad
O
Press once to temporarily stop the cooking process.
To resume cooking, press the Start pad.
O
Press twice to clear your instructions (returns to the initial screen)
or cancel cooking.
Tools
(pp.23–27)
Cooling
(p.22)
Please contact a service agent to change the temperature display
from Fahrenheit to Celsius.
Start Pad
O
After setting preheating or cooling, press this pad.
O
After preheating, setting memory cooking or manual cooking and press this pad to start
cooking.
O
The lamp will flash to encourage you to press the pad.
Touch
Screen
(display) (p.20)
O
Tap on the screen directly to use the controls.
O
Shows details such as the cooking temperature, cooking time,
stored cooking program, beep information, and so on.
O
Do not touch the screen with a sharp object.
Doing so will cause damage.
Exhaust Vent
Catalyst
The oil smoke that
circulates inside the
oven cavity is
decomposed and
purified by going
through the catalyst
converter.
O
The catalyst reaction
will lower when the
cooking temperature
is low [approximately
475°F (250°C) or
lower].
Door Handle
Intake Vent
Power Supply
Cord
Power Supply Plug
Please only plug in to outlets compatible with 20 Amp
Plug to NEMA #6-20P. Equipment is dedicated to
single phase power supply.
O
Illustrations may differ to the actual items. Caution labels are affixed to the actual oven.
Oil Tray
Collects oil from
inside the oven.
A specified SD
Memory Card is set
inside. (p.51)
O
How to remove the front
cover, drip tray, air filter, and
oil tray. (p.44)
Air Filter
Under the Drip Tray
Front Cover
Drip Tray
Collects food
residue and water.
Door
Opening this while cooking
will stop the operation.
Front
Back
Note
Always install the air filter, drip tray, and front
cover before using the oven.
Continuous use of the oven without these parts will
result in malfunction.
Parts of your Oven
GROUNDING
IMPORTANT:
FOR PERSONAL SAFETY, THIS OVEN MUST BE PROPERLY GROUNED.
When an outlet is not grounded, it is personal responsibility and obligation of the customer to have
it replaced with a properly grounded outlet.
An external equipotential
bonding conductor is
provided at the back side
of the oven and it is marked by
this symbol.
Control Panel
(initial screen)
