7
6
Operations
Indicates the cycle in
progress by flashing.
閃爍表示正在進行的
步驟。
Progress Indicator
過程指示燈
The water level which has been selected
will be displayed in the right side window.
所選水位會在右側窗口顯示。
Water level Indicator
水位顯示燈
Reserve
預約
Select how many hours
from now you would like
operation to stop.
選擇從現在開始幾小時後停
止運轉。
要改變行程以及洗衣以後的內容，請重新打開電源。
操作
顯示部位
注意
Indicators
按鈕部位
Buttons
Water level
水位
可根據需要進行切換。
Setting can be changed
according to your preference.
Process
過程
可選擇單一的步驟。詳細情
況請參照第21頁。
Custom cycles can be chosen.
See page 21 for details.
Attention Turn the power OFF and ON again to change the course or the preferences after the wash cycle.
After the course starts, the time left will be displayed as a guide.
* The time left display may differ from the actual time depending
on the type of washing and the setup conditions.
If the time has been set, the amount of time remaining will be
displayed.
Indicates the code which course has been selected.
Indicates the appropriate water level according to the laundry
amount.
開始後，顯示剩餘時間的估計值。
*根據洗滌物的種類和設置狀態，顯示的剩餘時間可能與實際不
同。
預約時,顯示幾小時後洗滌完畢。
顯示所選擇的程序的代碼。
根據衣物量顯示相應的水位。
Display window
顯示部
Course Indicator
程序指示燈
The code which course
has been selected will be
displayed in the left side
window.
所選程序代碼會在左側窗
口顯示。
According to laundry volume and
stain, you can select a suitable
course by yourself.
根據衣物量和髒污程度，您可以選
擇合適的程序。
按該鈕可開始洗衣。
按該鈕可使洗衣過程暫停。
一個功能步驟完成時，電源會自動關閉。
如果在打開電源後
10
分鐘內沒有開始洗
衣，電源將自動關閉。
關閉電源開關時，會發出蜂鳴音。
程序選擇
開始/暂停
電源開關
Course Selection
Start/Pause
Push this button to start.
Push this button to stop
mid-cycle.
The power automatically turns off when a
function cycle is finished.
The power automatically turns off if
washing is not begun within 10 minutes
after turning the power on.
The buzzer sounds when the power switch
is turned off.
Power Switch
（NA-F60A6P)
