background image

E)  HOW TO USE THE ACCESSORIES

1

1

Wand

Hose

NOTE:  Hold the handle to support the vacuum
cleaner when using tools and disconnecting or
attaching the hose.

Place selector in BARE FLOOR (TOOLS) position (See
CARPET/BARE FLOOR SELECTOR, page 9 ).

Disconnect the hose from the vacuum cleaner by gently
pulling the wand in the direction of the arrow. (Fig. A)

If using QuickDraw:

Disconnect the wand from the vacuum cleaner by gently
pulling the wand in the direction of the arrow. (Fig. B)

NOTE:

It may be necessary to slightly twist the hose or

wand to loosen from the nozzle hose.

Attach crevice tool, floor brush (MC-UL426 only), dusting
brush, or Air Turbine to the hose or wand.

For additional reach, the dusting
brush may be attached to the end of
the crevice tool.  

Hose /
Bonus Hose
(MC-UL426)

Wand /
Bonus Wand
(MC-UL426)

Dusting
Brush

Air
Turbine

Crevice
Tool

Floor Brush
(MC-UL426)

1

2

1

3

1

4

Fig. A

Fig. B

- 10 -

Crevice
Tool

Dusting Brush

1

5

1

6

CAUTION

While using the accessories, hold
the handle with one hand to avoid
pulling the vacuum cleaner over.

CAUTION

To avoid accidental injury, keep children away from
the agitator while in operation.

Содержание MCU-L424





























Отзывы: