−
B51
−
−
B50
−
English
After-Sale Service (Repair)
Repair
Consult to a dealer from whom you have purchased the product for details of repair.
When the product is incorporated to the machine or equipment you have purchased,
consult to the manufacturer or the dealer of the machine or equipment.
Cautions for Proper Use
• Practical considerations for exporting the product or assembly containing the product
When the end user of the product or end use of the product is associated with mili-
tary affair or weapon, its export may be controlled by the Foreign Exchange and
Foreign Trade Control Law. Complete review of the product to be exported and ex-
port formalities should be practiced.
• This product is intended to be used with a general industrial product, but not de-
signed or manufactured to be used in a machine or system that may cause personal
death when it is failed.
• Installation, wiring, operation, maintenance, etc., of the equipment should be done
by qualified and experienced personnel.
• Apply adequate tightening torque to the product mounting screw by taking into
consideration strength of the screw and the characteristics of material to which the
product is installed. Overtightening can damage the screw and/or material; under-
tightening can result in loosening.
Example) Steel screw (M5) into steel section: 2.7-3.3 N·m.
• Install a safety equipments or apparatus in your application, when a serious acci-
dent or loss of property is expected due to the failure of this product.
• Consult us if the application of this product is under such special conditions and envi-
ronments as nuclear energy control, aerospace, transportation, medical equipment,
various safety equipments or equipments which require a lesser air contamination.
• We have been making the best effort to ensure the highest quality of the products,
however, application of exceptionally larger external noise disturbance and static
electricity, or failure in input power, wiring and components may result in unexpected
action. It is highly recommended that you make a fail-safe design and secure the
safety in the operative range.
• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion
to the bearing, depending on the condition of the machine and its mounting environ-
ment, and may result in the bearing noise. Checking and verification by customer is
required.
• Failure of this product depending on its content, may generate smoke of about one
cigarette. Take this into consideration when the application of the machine is clean
room related.
• Please be careful when using in an environment with high concentrations of sulfur
or sulfric gases, as sulfuration can lead to disconnection from the chip resistor or a
poor contact connection.
7-1-1 Morofuku, Daito, Osaka, 574-0044, Japan Phone : +81-72-871-1212
© Panasonic Corporation 2009
• Take care to avoid inputting a supply voltage which significantly exceeds the rated
range to the power supply of this product. Failure to heed this caution may result in
damage to the internal parts, causing smoking and/or a fire and other trouble.
• The user is responsible for matching between machine and components in terms
of configuration, dimensions, life expectancy, characteristics, when installing the
machine or changing specification of the machine. The user is also responsible for
complying with applicable laws and regulations.
• The product will not be guaranteed when it is used outside its specification limits.
• Parts are subject to minor change to improve performance.
Technical information
Technical information of this product (Operating Instructions, CAD data) can be
downloaded from the following web site.
http://industrial.panasonic.com/ww/i_e/25000/motor_fa_e/motor_fa_e.html
For your records:
The model number and serial number of this product can be found on either the back or the
bottom of the unit. Please note them in the space provided and keep for future reference.
Model No.
M
□
D
□
M
□
M
□
Serial No.
Date of
purchase
Dealer
Name
Address
Phone
( ) -
